Specifications
Model GP6132
| U.S | Metric |
Volume | 23.5 GPM | 88.9 LPM |
Discharge Pressure | 3045 PSI | 210 BAR |
Speed | 800 RPM | |
Inlet Pressure | ||
Plunger Diameter | 1.26” | 32mm |
Plunger Stroke | 1.89” | 48mm |
Crankshaft Diameter | 1.65” | 42mm |
Key Width | 0.47” | 12mm |
Crankshaft Mounting | Either side | |
Shaft Rotation | Top of pulley towards manifold | |
Temperature of Pumped Fluids | Up to 140 oF | 60 oC |
Inlet Ports | (2) | |
Discharge Ports | (2) | |
Weight | 309 lbs | 140 kg |
Crankcase Oil Capacity | 1.1 Gal | 4.2 Liters |
Fluid End Material | Bronze | |
Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above.
HORSEPOWER RATINGS:
The rating shown are the power requirements for the pump. Gas engine power outputs must be approxi- mately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements, use the following formula:
HP = (GPM X PSI) / 1450
GP6132 HORSEPOWER REQUIREMENTS
RPM | GPM | 1000 PSI | 1500 PSI | 2500 PSI | 3045 PSI |
400 | 11.8 | 8.1 | 12.2 | 20.3 | 24.7 |
500 | 14.7 | 10.1 | 15.2 | 25.3 | 30.8 |
600 | 17.6 | 12.2 | 18.2 | 30.4 | 37.0 |
700 | 20.6 | 14.2 | 21.3 | 35.5 | 43.2 |
800 | 23.5 | 16.2 | 24.3 | 40.5 | 49.4 |
3
