Gigabyte 8S648FX-RZ-C user manual Pwrled, Fpanel 2 x 10 pins Connector

7) PWR_LED

PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn to another color.

	Pin No.	Definition
1	1	MPD+
	2	MPD-
	3	MPD-

-C

8) F_PANEL (2 x 10 pins Connector)

Please connect the power LED, PC speaker, reset switch and power switch etc of your chassisfront panel to the F_PANEL connector according to the pin assignment below.

English

Message LED/

Power/

Sleep LED

IDE Hard Disk Active LED

-C

Soft Power

Connector

Speaker Connector

MSG+ MSG- PW+ PW-		SPEAK+	SPEAK-
1	1	1	20
2
1			9
1	1		1
HD+ HD- RES- RES+ NC			Reset Switch

HD (IDE Hard Disk Active LED)	Pin 1: LED anode(+)
	Pin 2: LED cathode(-)
SPK (Speaker Connector)	Pin 1: VCC(+)
	Pin 2- Pin 3: NC
	Pin 4: Data(-)
RES (Reset Switch)	Open: Normal Operation
	Close: Reset Hardware System
PW (Soft Power Connector)	Open: Normal Operation
	Close: Power On/Off
MSG (Message LED/ Power/ Sleep LED)	Pin 1: LED anode(+)
	Pin 2: LED cathode(-)
NC	NC

- 15 - Hardware Installation Process