English
14) F_USB1 / F_USB2 (Front USB Connector)
Be careful with the polarity of the front USB connector. Check the pin assignment carefully while you connect the front USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional front USB cable, please contact your local dealer.
|
| Pin No. | Definition |
|
| 1 | Power |
|
| 2 | Power |
2 | 10 | 3 | USB DX- |
4 | USB Dy- | ||
|
| 5 | USB DX+ |
1 | 9 | 6 | USB Dy+ |
|
| 7 | GND |
|
| 8 | GND |
| 9 | No Pin | |
|
| 10 | NC |
15) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily shor
1 Open: Normal
1 | Short: Clear CMOS |
|
16) BAT (BATTERY)
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
+ Dispose of used batteries according to the manufacturer's instructions.
| If you want to erase CMOS... |
| 1. Turn OFF the computer and unplug the power cord. |
| 2. Remove the battery, wait for 30 second. |
3. | |
| 4. Plug the power cord and turn ON the computer. |
- 18 - |