AC97 Audio
Enabled | Enable onboard AC'97 audio function. (Default value) |
Disabled | Disable this function. |
On Board LAN device *
Disabled | Disable this function. |
Enabled | Enable Onboard Lan Chip device. (Default value) |
USB Controller |
|
Enabled | Enable USB Controller. (Default value) |
Disabled | Disable USB Controller. |
USB Legacy Support | |
When USB keyboard or mouse is installed, please set at Enabled. | |
Enabled | Enable USB keyboard or mouse support. |
Disabled | Disable USB keyboard or mouse support. (Default value) |
Onboard Serial Port 1 | |
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard Serial port 1 and address is 3F8. (Default value) |
2F8/IRQ3 | Enable onboard Serial port 1 and address is 2F8. |
3E8/IRQ4 | Enable onboard Serial port 1 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 1 and address is 2E8. |
Disabled | Disable onboard Serial port 1. |
Onboard Serial Port 2 | |
Auto | BIOS will automatically setup the port 2 address. |
3F8/IRQ4 | Enable onboard Serial port 2 and address is 3F8. |
2F8/IRQ3 | Enable onboard Serial port 2 and address is 2F8. (Default value) |
3E8/IRQ4 | Enable onboard Serial port 2 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 2 and address is 2E8. |
Disabled | Disable onboard Serial port 2. |
Onboard Parallel port | |
378/IRQ7 | Enable onboard LPT port and address is 378/IRQ7. (Default value) |
278/IRQ5 | Enable onboard LPT port and address is 278/IRQ5. |
Disabled | Disable onboard LPT port. |
3BC/IRQ7 | Enable onboard LPT port and address is 3BC/IRQ7. |
Parallel Port Mode | |
SPP | Using Parallel port as Standard Parallel Port. (Default value) |
EPP | Using Parallel port as Enhanced Parallel Port. |
ECP | Using Parallel port as Extended Capabilities Port. |
ECP+EPP | Using Parallel port as ECP & EPP mode. |
ECP Mode Use DMA | |
3 | Set ECP Mode Use DMA to 3. (Default value) |
1 | Set ECP Mode Use DMA to 1. |
"*" Only for
English
- 25 - | BIOS Setup |
