Gigabyte GA-3PXSL-RH user manual DriveA, Floppy3ModeSupport, HaltOn

GA-3PXSL-RH Motherboard

DriveA

The category identifies the types of floppy disk drive A that has been installed in the computer.

None		No floppy drive installed
360K, 51/4 in.		5.25 inch PC-type standard drive; 360K byte capacity.
1.2M, 51/4 in.		5.25 inch AT-type high-density drive; 1.2M byte capacity
		(3.5 inch when 3 Mode is Enabled).
720K, 31/2 in.		3.5 inch double-sided drive; 720K byte capacity
1.44M, 31/2	in.	3.5 inch double-sided drive; 1.44M byte capacity.
2.88M, 31/2	in.	3.5 inch double-sided drive; 2.88M byte capacity.

Floppy3ModeSupport

This is required to support older Japanese floppy drives. Floppy 3 Mode Support will allow reading and writing of 1.2MB (as opposed 1.44MB) on a 3.5-inch diskette.

Disabled	Normal Floppy Drive. (Default value)
Drive A	Drive A is 3 mode Floppy Drive.
Drive B	Drive B is 3 mode Floppy Drive.
Both	Drive A & B are 3 mode Floppy Drives.

HaltOn

This function allows system to halt when an error is detected during Power-On-Self -Test.

NO Errors	The system boot will not stop for any error that may be detected and you
	will be prompted.
All Errors	Whenever the BIOS detects a non-fatal error the system boot will be
	stopped.
All, But Keyboard	The system boot will not stop for all errors except a keyboard error.
	(Default value)
All, But Diskette	The system boot will not stop for all errors except a disk error.
All, But Disk/Key	The system boot will not stop for all errors except keyboard and disk errors.

3 0