Set Supervisor Password
You can install and change this options for the setup menus. Type the password up to 6 characters in lengh and press <Enter>. The password typed now will clear any previously entered password from the CMOS memory. You will be asked to confirm the entered password. Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a specified password or press <Enter> key to disable this option.
Password on boot
Password entering will be required when system on boot.
Enabled | Requries entering password when system on boot. |
Disabled | Disable this function. (Default setting) |
4 2