Introduction
1-2 Features Summary
Form Factor | y | 12” x 9.6” ATX form factor, 6 layers PCB. |
CPU | y | Supports single Intel® Xeon® processor |
| y | Intel Xeon® |
| y | Supports 800/1066/1333MHz FSB |
|
|
|
Chipset | y | Intel® 3200 Chipset |
| y | Intel® ICH9R |
|
|
|
Memory | y | 4 x DDR2 DIMM sockets |
| y | Supports up to 8GB 667/800 memory |
| y Dual Channel memory bus | |
| y ECC Unbuffered DDR2 667/800 | |
| y Supports 1GB, 2GB memory | |
|
|
|
I/O Control | y | ITE |
Expansion Slots | y | Supports 2 PCI slots |
| y Supports 1 | |
| y Supports 2 | |
|
|
|
SATA RAID Controller | y | Built in LSI SW RAID 0/1/10 |
y | XGI Volari Z9s | |
| y | 32MB DDR2 |
|
|
|
Internal Connector | y | 1 x |
| y | 1 x |
| y 1 x IDE connector | |
| y 1 x Floppy connector | |
| y 2 x USB 2.0 connectors for additional 4 ports by cable | |
| y 1 x front panel connecctor | |
| y 1 x CPU Fan connector | |
| y 2 x System Fan connecctor | |
| y 1 x IPMB connecctor | |
| y 1 x SMBus connecctor | |
| y | 6 x SATA 3.0Gb/s connectors |
|
|
|
Rear Panel I/O | y | 2 x PS/2 ports |
| y 1 x VGA port | |
| y 1 x COM port | |
| y 1 x ID Switch | |
| y 2 x LAN RJ45 ports | |
|
|
|
Hardware Monitor | y | Enhanced features with DDR 1.8V, VCC3 (3.3V) , VCORE, CPU |
5