English
Item Checklist
þ The | o 2 Port USB Cable x 1 | |
þ IDE cable x 1/ Floppy cable x 1 | o 4 Port USB Cable x 1 | |
þ CD for motherboard driver & utility (VUCD) | o SPDIF KIT x | |
þ | o IEEE 1394 Cable x1 | |
þ I/O Shield | o Center/Subwoofer Cable x1 | |
o Quick PC Installation Guide |
| |
o RAID Manual | o Motherboard Settings Label | |
|
|
|
WARNING! |
|
|
|
|
|
Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, y ou should follow some precautions whenever you work on your computer.
1.Unplug your computer when working on the inside.
2.Use a grounded w rist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case.
3.Hold components by the edges and try not touch the IC chips, leads or connectors, or other components.
4.Place components on a grounded antistatic pad or on the bag that came with the components whenever the components are separated from the system.
5.Ensure that the ATX pow er supply is switched off before you plug in or remove the ATX pow er connector on the motherboard.
Installing the motherboard to the chassis…
If the motherboard has mounting holes, but they don’t line up with the holes on the base and there are no slots to attach the spacers, do not become alarmed y ou can still attach the spacers to the mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to cut off, so be careful of your hands). In this way y ou can still attach the motherboard to the base without worrying about short circuits. Sometimes you may need to use the plastic springs to isolate the screw from the motherboard PCB surface, because the circuit wire may be near by the hole. Be careful, don’t let the screw contact any printed circuit write or parts on the PC B that are near the fix ing hole, otherwise it may damage the board or cause board malfunctioning.
- 4 - |
