English
Onboard Serial Port 1
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard Serial port 1 and address is 3F8. (Default value) |
2F8/IRQ3 | Enable onboard Serial port 1 and address is 2F8. |
3E8/IRQ4 | Enable onboard Serial port 1 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 1 and address is 2E8. |
Disabled | Disable onboard Serial port 1. |
Onboard Serial Port 2 | |
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard Serial port 2 and address is 3F8. |
2F8/IRQ3 | Enable onboard Serial port 2 and address is 2F8. (Default value) |
3E8/IRQ4 | Enable onboard Serial port 2 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 2 and address is 2E8. |
Disabled | Disable onboard Serial port 2. |
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal | Set onboard I/O chip UART to normal mode. (Default value) |
IrDA | Set onboard I/O chip UART to IrDA mode. |
ASKIR | Set onboard I/O chip UART to ASKIR mode. |
UR2 Duplex Mode |
|
This feature allows you to seclect IR mode. | |
This function will available when "UART Mode Select" doesn't set at Normal. | |
Half | IR Function Duplex Half. (Default value) |
Full | IR Function Duplex Full. |
Onboard Parallel port | |
Disabled | Disable onboard LPT port. |
378/IRQ7 | Enable onboard LPT port and address is 378/IRQ7. (Default value) |
278/IRQ5 | Enable onboard LPT port and address is 278/IRQ5. |
3BC/IRQ7 | Enable onboard LPT port and address is 3BC/IRQ7. |
Parallel Port Mode |
|
SPP | Using Parallel port as Standard Parallel Port. |
EPP1.9+SPP | Using Parallel port as Enhanced Parallel Port 1.9 and SPP mode. |
ECP | Using Parallel port as Extended Capabilities Port. |
EPP1.9+ECP | Using Parallel port as Enhanced Parallel Port 1.9 and ECP mode. |
PRINTER | Using Parallel port as printer port. (Default value) |
EPP1.7+SPP | Using Parallel port as Enhanced Parallel Port 1.7 and SPP mode. |
EPP1.7+ECP | Using Parallel port as Enhanced Parallel Port 1.7 and ECP mode. |
ECP Mode Use DMA | |
3 | Set ECP Mode Use DMA to 3. (Default value) |
1 | Set ECP Mode Use DMA to 1. |
- 38 - |