Gigabyte GA-8I865GMFK-775 BATBattery, FPANEL Front Panel Jumper, English, Power, IDE Hard

English

8) BAT(Battery)

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer's instructions.

9)F_PANEL (Front Panel Jumper)

If you want to erase CMOS...

1.Turn OFF the computer and unplug the power cord.

2.Take out the battery gently and put it aside for about 10 minutes (Or you can use a metal object to connect the positive and negative pins in the battery holder to make

them short for one minute). 3.Re-install the battery.

4.Plug the power cord and turn ON the computer.

Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_PANEL connector according to the pin assignment below.

Message LED/
Power/	Power	Speaker
Sleep LED	Switch	Connector

		MSG+ MSG- PW+ PW-	SPEAK+	SPEAK-
	2			20
	1			19
		HD+ HD- RES- RES+ NC
	IDE Hard
	Disk Active LED	Reset Switch
HD (IDE Hard Disk Active LED)	Pin 1: LED anode(+)
	Pin 2: LED cathode(-)
SPEAK (Speaker Connector)	Pin 1: Power
	Pin 2- Pin 3: NC
	Pin 4: Data(-)
RES (Reset Switch)	Open: Normal
	Close: Reset Hardware System
PW (Power Switch)	Open: Normal
	Close: Power On/Off
MSG(Message LED/Power/Sleep LED)	Pin 1: LED anode(+)
	Pin 2: LED cathode(-)
NC	NC

GA-8I865GM(F)K-775 Motherboard - 22 -