English
Standard CMOS Features |
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| Standard CMOS Features |
|
| |
| Date (mm:dd:yy) | Wed, Oct 27 2005 | Item Help | |||
| Time (hh:mm:ss) | 22:31:24 |
| Menu Level` | ||
` IDE Channel 0 Master | [None] |
| Change the day, month, | |||
` IDE Channel 0 Slave | [None] |
| year |
| ||
` IDE Channel 2 Master | [None] |
|
|
| ||
` IDE Channel 3 Master | [None] |
| <Week> |
| ||
| Drive A |
| [1.44M, 3.5"] | Sun. to Sat. | ||
|
|
|
| |||
| Drive B |
| [None] |
| <Month> | |
| Floppy 3 Mode Support | [Disabled] |
| Jan. to Dec. | ||
| Halt On |
| [All, But Keyboard] | <Day> |
| |
|
|
|
|
| 1 to 31 (or maximum | |
| Base Memory |
| 640K |
| allowed in the month) | |
| Extended Memory | 511M |
|
|
| |
| Total Memory |
| 512M |
| <Year> |
|
|
|
|
|
| 1999 to 2098 | |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
| Date |
|
|
|
|
|
| The date format is <week>, <month>, <day>, <year>. |
|
|
| ||
| Week | The week, from Sun to Sat, determined by the BIOS and is display only | ||||
| Month | The month, Jan. Through Dec. |
|
|
| |
| Day | The day, from 1 to 31 (or the maximum allowed in the month) |
| |||
| Year | The year, from 1999 through 2098 |
|
|
| |
Time
The times format in <hour> <minute> <second>. The time is calculated base on the
IDE Channel 0 Master, Slave
IDE HDD 
IDE Device Setup. You can use one of three methods:
• Auto | Allows BIOS to automatically detect IDE devices during POST(default) |
• None | Select this if no IDE devices are used and the system will skip the automatic |
| detection step and allow for faster system start up. |
• Manual | User can manually input the correct settings. |
Access Mode | Use this to set the access mode for the hard drive. The four options are: |
| CHS/LBA/Large/Auto(default:Auto) |
Capacity | Capacity of currently installed hard disk. |
IDE Channel 2/3 Master
IDE HDD 
Extend IDE Drive You can use one of the two methods:
• Auto | Allows BIOS to automatically detect IDE devices during POST(default) |
• None | Select this if no IDE devices are used and the system will skip the automatic |
| detection step and allow for faster system start up. |
Access Mode | Use this to set the access mode for the hard drive. The two options are: |
| Large/Auto(default:Auto) |
Capacity | Capacity of currently installed hard disk. |
