Gigabyte GA-8I915ME Series user manual Integrated Peripherals

English

2-3 Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Integrated Peripherals

On-Chip Primary PCI IDE	[Enabled]
On-Chip SATA Mode	[Enhanced]
x PATA IDE Set to	Ch.0 Master/Slave
SATA Port 0/2 Set to	Ch.2 Master/Slave
USB Controller	[Enabled]
USB 2.0 Controller	[Enabled]
USB Keyboard Support	[Disabled]
USB Mouse Support	[Disabled]
AC97 Audio	[Auto]
Onboard H/W LAN	[Enabled]
Onboard LAN Boot ROM	[Disabled]
Onboard Serial Port 1	[3F8/IRQ4]
Onboard Serial Port 2	[2F8/IRQ3]
Onboard Parallel Port	[378/IRQ7]
Parallel Port Mode	[SPP]
x ECP Mode Use DMA	3

Item Help

Menu Level`

KLJI: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Save Default		F7: Optimized Defaults

On-Chip Primary PCI IDE

Enabled	Enable onboard 1st channel IDE port. (Default value)
Disabled	Disable onboard 1st channel IDE port.

On-Chip SATA Mode

Disabled	Disable this function.
Auto	BIOS will auto detect.
Combined	Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on
	the motherboard; 2 for SATA and the other for PATA IDE.
Enhanced	Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6
	HDDs to use.(Default value)
Non-Combined	Set On-Chip SATA mode to Non-Combined, SATA will be simulated to
	PATA mode.

PATA IDE Set to

Ch.1 Master/Slave	Set PATA IDE to Ch. 1 Master/Slave. (Default value)
Ch.0 Master/Slave	Set PATA IDE to Ch. 0 Master/Slave.
SATA Port 0/2 Set to

This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".

If PATA IDE were set to Ch. 1 Master/Slave, this function will auto set to Ch. 0 Master/Slave.

USB Controller

Enabled	Enable USB Controller. (Default value)
Disabled	Disable USB Controller.

USB 2.0 Controller

Disable this function if you are not using onboard USB 2.0 feature.

Enabled	Enable USB 2.0 Controller. (Default value)
Disabled	Disable USB 2.0 Controller.

GA-8I915ME Series Motherboard - 40 -