English
2-1 Standard CMOS Features
CMOS Setup
Standard CMOS Features
Date (mm:dd:yy) | Mon, Mar 28 2005 |
Time (hh:mm:ss) | 22:31:24 |
` IDE Channel 0 Master | [None] |
` IDE Channel 0 Slave | [None] |
` IDE Channel 2 Master | [None] |
` IDE Channel 2 Slave | [None] |
Drive A | [1.44M, 3.5"] |
Drive B | [None] |
Floppy 3 Mode Suport | [Disabled] |
Holt On | [All, But Keyboard] |
Base Memory | 640K |
Extended Memory | 127M |
Total Memory | 128M |
Item Help
Menu Level`
Change the day, month, year
<Week> Sun. to Sat.
<Month> Jan. to Dec.
<Day>
1 to 31 (or maximum allowed in the month)
<Year>
1999 to 2098
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | |
F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
Date
The date format is <week>, <month>, <day>, <year>.
Week | The week, from Sun to Sat, determined by the BIOS and is display only |
Month | The month, Jan. Through Dec. |
Day | The day, from 1 to 31 (or the maximum allowed in the month) |
Year | The year, from 1999 through 2098 |
Time
The times format in <hour> <minute> <second>. The time is calculated base on the
IDE Channel 0~2 Master, Slave
IDE HDD 
IDE Channel 0 ~2 Master(Slave) IDE Device Setup. You can use one of three methods:
Auto | Allows BIOS to automatically detect IDE devices during POST(default) |
None | Select this if no IDE devices are used and the system will skip the automatic |
| detection step and allow for faster system start up. |
Manual | User can manually input the correct settings |
Access Mode | Use this to set the access mode for the hard drive. The four options are: |
| CHS/LBA/Large/Auto(default:Auto) |
Hard drive information should be labeled on the outside drive casing. Enter the appropriate option based on this information.
Cylinder | Number of cylinders |
|
Head | Number of heads |
|
Precomp | Write precomp |
|
Landing Zone | Landing zone |
|
Sector | Number of sectors |
|
If a hard disk has not been installed, select NONE and press <Enter>. | ||
|
| |
- 36 - | ||
