English
Turbo | Set C.I.A.2 to Turbo. (Automatically increase CPU frequency(15%,17%) by |
| CPU loading. |
Full Thrust | Set C.I.A.2 to Full Thrust. (Automatically increase CPU frequency(17%, 19%) |
by CPU loading.
Warning: Stability is highly dependent on system components.
CPU Host Clock Control
Please note that if your system is overclocked and cannot restart, please wait 20secs. for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled | Disable CPU Host Clock Control. (Default value) |
Enabled | Enable CPU Host Clock Control. |
CPU Host Frequency (Mhz)
100MHz ~ 600MHz Set CPU Host Frequency from 100MHz to 600MHz.
If you use FSB533 Pentium 4 processor, please set "CPU Host Frequency" to 133MHz.If you use FSB800 Pentium 4 processor, please set "CPU Host Frequency" to 200MHz.
Incorrect using it may cause your system broken. For power
PCI Express Frequency (Mhz)
Auto | Set PCI Express frequency automatically. (Default value) |
90~150 | Set PCI Express frequency from 90MHz to 150MHz. |
System Memory Multiplier
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue. for FSB(Front Side Bus) frequency=533Mhz,
3.00 | Memory Frequency = Host clock X 3.00. |
4.00 | Memory Frequency = Host clock X 4.00. |
2.00 | Memory Frequency = Host clock X 2.00. |
2.66 | Memory Frequency = Host clock X 2.66. |
Auto | Set Memory frequency by DRAM SPD data. (Default value) |
for FSB(Front Side Bus) frequency=800MHz, | |
2.00 | Memory Frequency = Host clock X 2.00. |
2.66 | Memory Frequency = Host clock X 2.66. |
3.00 | Memory Frequency = Host clock X 3.00. |
4.00 | Memory Frequency = Host clock X 4.00. |
Auto | Set Memory frequency by DRAM SPD data. (Default value) |
Memory Frequency (Mhz)
The values depend on CPU Host Frequency (Mhz) and System Memory Multiplier setting.
DIMM OverVoltage Control
Please note that by overclocking your system through the increase of the DIMM voltage, damage
to the memory may occur. |
| |
Normal | Set DIMM OverVoltage Control to Normal. (Default value) | |
+0.1V | Set DIMM OverVoltage Control to +0.1V. | |
+0.2V | Set DIMM OverVoltage Control to +0.2V. | |
+0.3V | Set DIMM OverVoltage Control to +0.3V. | |
+0.4V | Set DIMM OverVoltage Control to +0.4V. | |
+0.5V | Set DIMM OverVoltage Control to +0.5V. | |
+0.6V | Set DIMM OverVoltage Control to +0.6V. | |
Incorrect using it may cause your system broken. For power | ||
|
| |
- 44 - | ||
