2-7 MB Intelligent Tweaker(M.I.T.)
CMOS Setup
MB Intelligent Tweaker(M.I.T.)
English
| HT Frequency ratio | [Auto] |
| CPU Frequency | [200] |
| K8 CPU Clock Ratio | [Auto] |
| Current DDR speed | 266 |
| DDR Clock/ Timing Mode | [Auto] |
| CPU/DDR clock Ratio | 2/1.33 |
| DDR Speed | 266 |
x | DDR Timing | Auto |
x | CAS# latency (Tcl) | 2.5 |
x Min RAS# active time (Tras) | 6T | |
x RAS# to CAS# delay (Trcd) | 3T | |
x Row precharge Time (Trp) | 3T | |
x Row to Row delay (Trrd) | 2T | |
x Row cycle time (Trc) | 9T | |
x Row refresh cyc time (Trfc) | 10T | |
x | 4T | |
x Write Recovery Time (Twr) | 2 bus clock | |
x | 1 bus clock | |
x | Refresh Rate (Tref) | 133MHz, 15.6 us |
Item Help
Menu Level
: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | |
| F5: Previous Values | F7: Optimized Defaults |
|
CMOS Setup
MB Intelligent Tweaker(M.I.T.)
x | Read Preamble value | 7ns |
x | Async Latency value | 7ns |
| CPU Spread Spectrum | [Center Spread] |
| PCIE Clock | [100Mhz] |
| Robust Graphics Booster | [Auto] |
| CPU Voltage Control | [Normal] |
| Normal CPU Vcore | 1.500V |
| Chipset core | [Normal] |
| [Normal] | |
| DDR voltage control | [Normal] |
Item Help
Menu Level
: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | |
| F5: Previous Values | F7: Optimized Defaults |
|
Incorrect using these features may cause your system broken. For power
HT Frequency ratio
Set HT Frequency ratio to 1x, 1.5x, 2x, 2.5x, 3x, 4x, or 5x. (Default: Auto)
CPU Frequency
200 ~ 456 | Set CPU frequency from 200Mhz to 456Mhz. |
K8 CPU Clock Ratio
This setup option will automatically assign by CPU detection. The option will display "Locked" and read only or will not show up if the CPU ratio is not changeable.
- 49 - | BIOS Setup |