Current Voltage(V) Vcore / DDR25V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/POWER/SYSTEM FAN Speed (RPM)
Detect CPU/Power/System fan speed status automatically.
CPU Warning Temperature
60oC / 140oF | Monitor CPU temperature at 60oC / 140oF. |
70oC / 158oF | Monitor CPU temperature at 70oC / 158oF. |
80oC / 176oF | Monitor CPU temperature at 80oC / 176oF. |
90oC / 194oF | Monitor CPU temperature at 90oC / 194oF. |
Disabled | Disable this function. (Default value) |
CPU FAN Fail Warning
Disabled | Disable CPU fan fail warning function. (Default value) |
Enabled | Enable CPU fan fail warning function. |
CPU Smart FAN Control (Note)
Disabled | Disable this function. (Default Value) |
Enabled | When this function is enabled, CPU fan will run at different speed depending |
| on CPU temperature. Users can adjust the fan speed with Easy Tune |
| based on their requirements. |
CPU FAN Manual Control
CPU Smart Fan Control will become disabled when this item is enabled.
Enabled | Enable the CPU fan manual control function. |
Disabled | Disable the CPU fan manual control function. (Default value) |
CPU FAN: Low Speed
Set the parameter of the CPU fan speed.
The CPU FAN: Low Speed option configures the speed of the CPU fan when the CPU temperature is below the temperature set in Temp Limit of Mid Speed. The parameter can be adjusted from 0~127. Higher parameter means faster CPU fan speed. (Default parameter: 8)
CPU FAN: Mid Speed
Set the parameter of the CPU fan speed.
The CPU FAN: Mid Speed option configures the speed of the CPU fan when the CPU temperature exceeds the temperature set in Temp Limit of Mid Speed. The parameter can be adjusted from 0~127. Higher parameter means faster CPU fan speed. (Default parameter: 12)
CPU FAN: High Speed
Set the parameter of the CPU fan speed.
The CPU FAN: High Speed option configures the speed of the CPU fan when the CPU temperature exceeds the temperature set in Temp Limit of High Speed. The parameter can be adjusted from 0~127. Higher parameter means faster CPU fan speed. (Default parameter: 80)
The CPU fan runs at full speed when both CPU Smart FAN Control and CPU FAN Manual Control are disabled.
(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install. For more detailed information please check at the FAQ section on GIGABYTE's website.
- 47 - | BIOS Setup |
English
