English
PC Health Status |
|
|
|
| ||
|
| CMOS Setup |
| |||
|
|
| PC Health Status |
|
| |
| Reset Case Open Status | [Disabled] |
|
| Item Help | |
| Case Opened |
| Yes |
| Menu Level ` | |
| VCORE |
| OK |
|
|
|
| DDR Power |
| OK |
| [Disabled] | |
| +3.3V |
| OK |
| Don’t reset case | |
| +12V |
| OK |
| open status | |
| System Temperature | 32oC/89oF |
|
|
| |
| CPU Temperature | 45oC/113oF |
| [Enabled] | ||
| System FAN Speed | 3245 RPM |
| Clear case open status | ||
| CPU FAN Speed | 3245 RPM |
| and set to be Disabled | ||
| CPU Warning Temp. | [Disabled] |
| at next boot | ||
| System FAN Stop Warning | [Disabled] |
|
|
| |
| CPU FAN Stop Warning | [Disabled] |
|
|
| |
| CPU Smart FAN Control | [Disabled] |
|
|
| |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
| |
| Reset Case Open Status |
|
|
|
| |
| Disabled | Don't reset case open status. (Default value) |
| |||
| Enabled | Clear case open status at next boot. |
|
| ||
Case Opened
If the case is closed, Case Opened will show "No." If the case is opened, Case Opened will show "Yes."
If you want to reset Case Opened value, enable Reset Case Open Status and save the change to CMOS, and then your computer will restart.
Current Voltage(V) VCORE / DDR Power / +3.3V / +12V
Detect system's voltage status automatically.
System/CPU Temperature
Detect system/CPU temperature automatically.
System/CPU FAN Speed (RPM)
Detect system/CPU fan speed status automatically.
CPU Warning Temp.
60oC / 140oF | Monitor CPU temperature at 60oC / 140oF. |
70oC / 158oF | Monitor CPU temperature at 70oC / 158oF. |
80oC / 176oF | Monitor CPU temperature at 80oC / 176oF. |
90oC / 194oF | Monitor CPU temperature at 90oC / 194oF. |
Disabled | Disable this function. (Default value) |
System/CPU FAN Stop Warning | |
Disabled | Disable System/CPU fan stop warning function. (Default value) |
Enabled | Enable System/CPU fan stop warning function. |
CPU Smart FAN Control (Note) | |
Disabled | Disable this function. (Default value) |
Enabled | When this function is enabled, CPU fan will run at different speed depending |
| on CPU temperature. Users can adjust the fan speed with Easy Tune |
| based on their requirements. |
(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install. For more detailed information please check at the FAQ section on GIGABYTE's website.
- 42 - |
