Gigabyte GA-K8N51GMF-9-RH user manual Spp

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software

Integrated Peripherals

SATAII RAID Config		[Press Enter]		Item Help
On-Chip IDE Channel0		[Enabled]		Menu Level
On-Chip IDE Channel1		[Enabled]
IDE1 Conductor Cable		[Auto]
IDE2 Conductor Cable		[Auto]
Serial-ATA-II 1		[Enabled]
Serial-ATA-II 2		[Enabled]
On-Chip USB		[V1.1+V2.0]
USB Keyboard Support		[Disabled]
USB Mouse Support		[Disabled]
Onboard Audio Function		[Auto]
Onboard LAN Function		[Auto]
Onboard LAN Boot ROM		[Disabled]
Onboard 1394 Function		[Enabled]
Onboard Serial Port 1		[3F8/IRQ4]
Onboard Parallel Port		[378/IRQ7]
Parallel Port Mode		[SPP]
: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Figure 1

In the SATAII RAID Config submenu, enable SATA-II RAID function. Then enable the SATA ports with hard disks that you want to use for RAID. In the example in Figure 2, enable SATA-II 1 Primary/ Secondary RAID or SATA-II 2 Primary/Secondary RAID). (For example, if you wish to create RAID with hard disks on the SATAII0 and SATAII1 connectors, set SATA-II 1 Primary/Secondary RAID to Enabled).

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software

SATAII RAID Config

SATA-II RAID function		[Disabled]		Item Help
x SATA-II 1 Primary RAID		Disabled		Menu Level
x SATA-II 1 Secondary RAID		Disabled
x SATA-II 2 Primary RAID		Disabled
x SATA-II 2 Secondary RAID		Disabled
: Move	Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
F5: Previous Values		F6: Fail-Safe Defaults		F7: Optimized Defaults

Figure 2

The BIOS Setup menus described in this section may not show the exact settings for your motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version.

- 65 - Appendix

English