25
Blinking Error Lamp (red)/Specifications•Repeat operation from step 1 on page 10 after the following remedies.
Blinks slow (once a second): Communication error with camera
Cause Remedy Page
Camera power is off Turn camera power on 10
Shutter is released during communication Do not release shutter during 7
with camera communication
Plug is loose Attach plug properly 8
Blinks fast (4 times a second): Memory card error
Cause Remedy Page
Writing error Insert new card 8
Card is not properly inserted into the slot Insert card properly 8
Card’s available memory is insufficient Insert new (empty) card 9
Card is not formatted correctly Insert correctly formatted card 13
With F100, a film in use is loaded when Remove the film in use 21
setting/changing recording data
•The memory card and the plug may be inserted or removed freely while the error
lamp is on.
Specifications and design are subject to change without notice.
•CompactFlash™ is a trademark of SanDisk Corporation.
•Microsoft®, Microsoft® Excel and Windows® are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
•Microdrive is a trademark of Hitachi Global Storage Technologies in the United
States and/or other countries.
•Products and brand names are trademarks or registered trademarks of their
respective companies.
Power Supplied by camera
Dimensions (WxHxD) Approx. 78 x 25 x 109mm or 3.1 x 1.0 x 4.3 in.
Cable length Approx. 400mm or 15.7 in.
Weight Approx. 100g or 3.5 oz. (main unit only, excluding
memory card)
Operating conditions Temperature: 0-40°C or 32-104°F, humidity: under 85%
•Specifications
•Blinking Error Lamp (red)
MV-1 (EGFSI) 05.2.14 5:21 PM Page 25