8
Basic operation
1. Connecting to camera and inserting memory card
START
CompactFlash Card
TM
EC-8CF
M
B
(Illustrations show the F6)
1Confirm film is not loaded in the camera (Eis
displayed in the frame counter) and battery
power is sufficient.
•If shooting data stored in the camera is too large
and/or data remains in the memory card, data
transfer from the camera to the memory card will
take a long time. Change batteries for new ones
when necessary.
xSee camera’s instruction manual for battery
power confirmation.
2Turn the camera power off.
3Remove the cap on the 10-pin terminal,insert
the MV-1 plug so that the
Y
mark on the plug
aligns with the index mark • on the camera
terminal,then rotate in the direction shown to
lock it in place.
•The position of the 10-pin terminal may vary
depending on your camera model. Refer to your
camera’s instruction manual for details.
•The Extension Cord MC-21 cannot be used.
4Insert the memory card into the memory card
slot.
•Supplied memory card has been formatted in FAT
file system (x13) and can be used as it is.
•Hold the memory card so that the label is on the
same side as the MV-1 start button, and insert it
pins-first into the memory card slot.
•Use a memory card in which no data remains.
•Refer to the list of supported memory card types
on p. 24 for more information.
MV-1 (EGFSI) 05.2.14 5:21 PM Page 8