Gigabyte GA-K8N51PVMT-9-RH user manual English

Step 2:

If you do not create RAID, select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard Disk Boot Priority submenu, select the model of the SATA hard drive onto which you wish to install Microsoft Windows 2000/XP. You should see a screen similar to Figure 3 below.

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software

Hard Disk Boot Priority

English

1. CH2 M.	:	ST3120026AS
2. CH3 M.	:	ST3120026AS
3. Bootable Add-in Cards

Item Help

Menu Level

Use < > or < > to select a device, then press <+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu.

: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit

Figure 3

After configuring the SATA controller mode in system BIOS, if you wish to create RAID, save the settings and exit. Then go to RAID BIOS (refer to page 6) to configure the RAID array. After finished, re-enter the system BIOS Setup to set hard disk boot priority before OS installation. Select Hard Disk Boot Priority under the Advanced BIOS Features menu. In the Hard Disk Boot Priority submenu, select the RAID array onto which you wish to install Microsoft Windows 2000/XP (Figure 4).

CMOS Setup Utility-Copyright (C) 1984-2006 Award Software

Hard Disk Boot Priority

1. SCSI-0: NVIDIA MIRROR 111.7

2. Bootable Add-in Cards

Item Help

Menu Level

Use < > or < > to select a device, then press <+> to move it up, or <-> to move it down the list. Press <ESC> to exit this menu.

: Move PU/PD/+/-: Change Priority F10: Save ESC: Exit

Figure 4

- 67 - Appendix