English

1-3 Installation of the CPU and Heatsink

Before installing the CPU, please comply with the following conditions:

1. Please make sure that the motherboard supports the CPU.

2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU.

3.Please add an even layer of heat sink paste between the CPU and heatsink.

4.Please make sure the heatsink is installed on the CPU prior to system use, otherwise overheating and permanent damage of the CPU may occur.

5.Please set the CPU host frequency in accordance with the processor specifications. It is not recommended that the system bus frequency be set beyond hardware specifications since it does not meet the required standards for the peripherals. If you wish to set the frequency beyond the proper specifications, please do so according to your hardware specifications including the CPU, graphics card, memory, hard drive, etc.

1-3-1 Installation of the CPU

Check the processor pins to see that none are bent. Move the socket lever to the unlocked position as shown in Figure 1.(90o to the plane of the motherboard) prior to inserting the processor. The pin 1 location is designated on the processor by a copper triangle that matches up to a triangle on the socket as shown in Figure 2. Align the processor to the socket and gently lower it into place. Do not force the processor into the socket.

 

Fig.1

Socket lever

Position lever at a 90 degree angle.

Fig.2

Pin 1 location on the socket and processor.

Gently place the CPU into position making sure that the CPU pins fit perfectly into their holes. Once the CPU is positioned into its socket, place one finger down on the middle of the CPU and gently press the metal lever back into its original position.

Please use extra care when installing the CPU. The CPU will not fit if positioned incorrectly. Rather than applying force, please change the positioning of the CPU.

GA-K8NE-RH Motherboard

- 12 -

Page 11 Page 13
Page 12
Image 12
Gigabyte GA-K8NE-RH user manual Installation of the CPU and Heatsink
Page 11 Page 13

GA-K8NE-RH specifications

The Gigabyte GA-K8NE-RH is a reliable motherboard designed for AMD processors, specifically catering to the Socket 754 form factor. Released during a time when AMD's Athlon 64 processors were gaining popularity, the GA-K8NE-RH stands out for its remarkable performance and a range of features that appealed to both gamers and general users alike.

One of the main highlights of the GA-K8NE-RH is its ability to support AMD’s 64-bit processing technology, allowing users to take full advantage of the enhanced performance capabilities of Athlon 64 CPUs. This motherboard supports memory configurations with up to 4GB of DDR memory, utilizing dual-channel architecture. This dual-channel setup not only boosts memory bandwidth but also improves overall system performance, making it ideal for multitasking and memory-intensive applications.

The GA-K8NE-RH is built on the nForce3 250 chipset, which features an integrated NVIDIA graphics processing unit. This allows for a more streamlined graphic performance, making it suitable for casual gaming and multimedia applications. Furthermore, the integrated Gigabit Ethernet ensures high-speed network connectivity, essential for online gaming and downloading large files.

This motherboard also includes multiple IDE and SATA connectors. With support for SATA II, users can benefit from faster data transfer rates compared to traditional IDE connections. Additionally, the inclusion of RAID support enables users to set up disk redundancy for improved data security or enhanced read/write speeds, depending on their setup.

In terms of audio capabilities, the GA-K8NE-RH features a built-in 6-channel audio codec, providing clear sound quality for an immersive multimedia experience. The onboard PCI Express and PCI slots offer ample expansion opportunities for graphics cards, sound cards, or additional peripherals, making it a flexible choice for various builds.

Moreover, Gigabyte's renowned durability features ensure that the GA-K8NE-RH remains a dependable choice for enthusiasts. The motherboard is equipped with a range of capacitors and solid-state components that contribute to its longevity and stability.

Overall, the Gigabyte GA-K8NE-RH is a well-rounded motherboard that provides excellent performance and versatility for users looking to build a capable AMD-based system. With a combination of stable performance, advanced features, and support for various technologies, it remains an appealing option for users seeking value and reliability in their computing experience.
Top Page Image Contents