Gigabyte GA-K8NE-RH Write-to-Read Delay Twtr, Refresh Rate Tref, Read Preamble value, Pcie Clock

Write-to-Read Delay (Twtr)

1	bus clock	Set Write-to-Read Delay to 1 bus clock.
2	bus clock	Set Write-to-Read Delay to 2 bus clock. (Default value)

Refresh Rate (Tref)

Set the Refresh Rate.

Read Preamble value

2~9.5ns	Set the Read Preamble value. (Default value: 5.5ns)
Async Latency value
2~11ns	Set the Async Latency value (Default value: 7ns)
CPU Spread Spectrum
Disabled	Disable CPU Spread Spectrum.
Center Spread	Set CPU Spread Spectrum to Center Spread. (Default value)
PCIE Clock
100Mhz ~ 150Mhz	Set PCI-E clock from 100Mhz to 150Mhz.

Hammer Vid Control

Supports adjustable Hammer Vide from 0.825V to 1.550V. (Default value: StartUp)

Robust Graphics Booster

Select the options can enhance the VGA graphics card bandwidth to get higher performance.

Auto	Set Robust Graphics Booster to Auto. (Default value)
Fast	Set Robust Graphics Booster to Fast.
Turbo	Set Robust Graphics Booster to Turbo.

DDR voltage control

Normal	Supply DDR voltage as DDR required. (Default value)
+0.1V	Increase DDR voltage +0.1V.
+0.2V	Increase DDR voltage +0.2V.

English

- 45 - BIOS Setup