English

Onboard Serial Port 1

Auto

BIOS will automatically setup the Serial port 1 address.

3F8/IRQ4

Enable onboard Serial port 1 and address is 3F8. (Default value)

2F8/IRQ3

Enable onboard Serial port 1 and address is 2F8.

3E8/IRQ4

Enable onboard Serial port 1 and address is 3E8.

2E8/IRQ3

Enable onboard Serial port 1 and address is 2E8.

Disabled

Disable onboard Serial port 1.

Onboard Parallel Port

Disabled

Disable onboard LPT port.

378/IRQ7

Enable onboard LPT port and address is 378/IRQ7. (Default value)

278/IRQ5

Enable onboard LPT port and address is 278/IRQ5.

3BC/IRQ7

Enable onboard LPT port and address is 3BC/IRQ7.

Parallel Port Mode

SPP

Using Parallel port as Standard Parallel Port. (Default value)

EPP

Using Parallel port as Enhanced Parallel Port.

ECP

Using Parallel port as Extended Capabilities Port.

ECP+EPP

Using Parallel port as ECP and EPP mode.

ECP Mode Use DMA

3

Set ECP Mode Use DMA to 3. (Default value)

1

Set ECP Mode Use DMA to 1.

On-Chip USB

Disabled

Disable this function if you are not using onboard USB function.

V1.1+V2.0

Enable USB 1.1 and USB 2.0 controller. (Default value)

V1.1

Enable only USB 1.1 controller.

Legacy USB Keyboard/Storage

Enabled

Enable USB keyboard support in the MS-DOS environment.

Disabled

Disable this function. (Default value)

Legacy (DOS) USB Mouse

Enabled

Enable USB mouse support in the MS-DOS environment.

Disabled

Disable this function. (Default value)

Legacy USB storage detect

This option allows users to decide whether to detect USB storage devices, including USB flash drives and USB hard drives during POST.

Enabled

BIOS will scan all USB storage devices. (Default value)

Disabled

Disable this function.

GA-K8NF-9-RH Motherboard

- 36 -

Page 36
Image 36
Gigabyte GA-K8NF-9-RH Onboard Serial Port, Onboard Parallel Port, Parallel Port Mode, ECP Mode Use DMA, On-Chip USB