Manuals / Gigabyte / Computer Equipment / Network Card

Gigabyte GN-FE605(M) manual Install SNMP service in Windows NT4

Models: GN-FE605(M)

1 62

Download 62 pages 27.28 Kb

Page 40

GN-FE605(M) PCI Adapter User’s Guide

6.In the System Setting Change dialog box, click OK to restart the system and finish the installation.

Note:

1. SNMP starts automatically after system restart.

Install SNMP service in Windows NT4

In Microsoft windows NT4, SNMP service installation procedure is listed as the following:

1.Click Start, point to Settings, click Control Panel, double-click Network.

2.In the Network dialog box, click Services tab.

3.In the Services tab, click Add.

4.In the Select Network Service dialog box, select SNMP Service from the Network Service list, and then click OK.

5.In the Windows NT Setup dialog box, type the Windows NT Source Path, and then click Continue.

6.After Windows NT Setup finish file-copy, in the Windows SNMP Properties dialog box click OK.

7.In the Network dialog box, SNMP Service will add to the Network Services list control in the Services tab, and then click Close.

8.In the System Setting Change dialog box, click OK to restart the system and finish the installation.

Note:

1.You must be logged on as an administrator or a member of the Administrators group in order to complete this procedure. If your computer is connected to a network, network policy settings might also prevent you from completing this procedure.

2.SNMP starts automatically after installation.

Start or stop SNMP service in Windows 2000/XP

1.Click Start, point to Settings, and click Control Panel. Double-click Administrative Tools and then double-click Computer Management.

38

Image 40

Gigabyte GN-FE605(M) manual Install SNMP service in Windows NT4, Start or stop SNMP service in Windows 2000/XP

Contents

Rev. 1.0 First Edition GN-FE605M 10/100 Fast Ethernet PCI Adapter User’s GuideGN-FE605M PCI Adapter User’s Guide Contents 6. TROUBLESHOOTING8. LIMITED WARRANTY 7. APPENDIXImportant safety information 1. Safety, Care and Regulatory InformationPrecautions for Products With Laser Devices Federal Communications Commission FCC Statement Canadian Department of Communications Compliance Statement FCC part 68 applicable to products fitted with USA modemsfor Canadian users only European Community Directive Conformance Statement R&TTE Directive applicable to products fitted with European modems2. Introduction Contents of Your ShipmentFast Ethernet Port LED indicator description GN-FE605M Fast Ethernet PCI Adapter Indicator DescriptionGN-FE605M Fast Ethernet PCI Adapter Block Diagram 3. Adapter Specifications GN-FE605 4. Key FeaturesGN-FE605M 5.2 Install the Network Driver 5. Installation Procedures5.1 Insert the Networking Interface Card 5.3 Software Drivers 7. Appendix 6. TroubleshootingAWake-On-LAN WOL Windows NT4.0 B Driver Installation For GN-FE605Step1. Click the Start button, select Setting, and Control Panel GN-FE605M PCI Adapter User’s GuideStep3. In the Network window, click on the “Adapters” tab. Click on the Add button Step7. Windows will copy the required files to the directory Step9. Storing binding configuration… GN-FE605M PCI Adapter User’s GuideStep10. If the TCP/IP protocol has been installed, the IP address entry screen will appear. Enter the IP address, subnet mask, gateway address and other required values and click on the Apply button. Consult with your network administrator and if required, set DNS and WINS address as well. After these values have been entered, click on the OK button Windows 2000/XP Step4. Select “Search for a suitable driver for my device” and click on the Next button Step6. The setup wizard reports that a driver for the device has been found. Click on the Next button to initiate driver installation Windows 95/98/Me GN-FE605M PCI Adapter User’s GuideGN-FE605M PCI Adapter User’s Guide Step5. Click on the Next button GN-FE605M PCI Adapter User’s GuideStep7. After the file copy has completed, click on the Finish button GN-FE605M PCI Adapter User’s GuideC Driver Installation For GN-FE605M Windows NT4.0GN-FE605M PCI Adapter User’s Guide Step7. Windows will copy the required files to the directory the CD-ROM drive. as the driver path and click on the OK buttonGN-FE605M PCI Adapter User’s Guide Step9. Storing binding configuration… GN-FE605M PCI Adapter User’s GuideGN-FE605M PCI Adapter User’s Guide Windows 2000/XP GN-FE605M PCI Adapter User’s GuideGN-FE605M PCI Adapter User’s Guide GN-FE605M PCI Adapter User’s Guide Windows 95/98/Me GN-FE605M PCI Adapter User’s GuideGN-FE605M PCI Adapter User’s Guide Step5. Click on the Next button GN-FE605M PCI Adapter User’s GuideStep7. After the file copy has completed, click on the Finish button GN-FE605M PCI Adapter User’s GuideConfiguration Example D SNMP ONLY FOR GN-FE605M IntroductionInstall SNMP service in Windows Install SNMP service in Windows 2000/XPSNMP service operation Install SNMP service in Windows NT4 Start or stop SNMP service in Windows 2000/XPInstall SNMP extension agent in Windows Install SNMP extension agent in Windows 2000/XPSNMP extension agent operation Install SNMP extension agent in Windows NT4 Install SNMP extension agent from Gigabyte CD You can also install SNMP service directly from the Gigabyte CD2. The Setup Winzard will be displayed GN-FE605M PCI Adapter User’s Guide3. click Next 4. Click Next GN-FE605M PCI Adapter User’s GuideRemove SNMP extension agent in Windows platform 5. Click Finish to complete Setup2. In the list of installed program , choose SNMP Add/Remove ProgramsMIB-II and RMON counter support MIB-II countersGN-FE605M PCI Adapter User’s Guide RMON counters GN-FE605M PCI Adapter User’s GuideGN-FE605M PCI Adapter User’s Guide GN-FE605M PCI Adapter User’s Guide GN-FE605M PCI Adapter User’s Guide GN-FE605M PCI Adapter User’s Guide GN-FE605M PCI Adapter User’s Guide Overview A Snapshot of NIC Control SetE NIC Control Set for GN-FE605M Introduction GN-FE605M PCI Adapter User’s GuideInstallation of NIC Control Set UninstallationHardware Requirements Windows Platform SupportsMy Computer Fundamental FunctionsClient All network clients currently installed in this computer Service All network services currently installed in this computerGN-FE605M PCI Adapter User’s Guide General SettingDisplay and set the parameters for the NIC e.g. Connection Type… Diagnostics StatisticsVLAN settings AboutManufacture contact information Advanced Management FunctionsOnly For FE605MSetting for add/remove VLAN User should specify VLAN ID and VLAN name in the dialog boxVLAN01 VLAN ID = 1 added VLAN01 VID = 1 will be displayed in VLAN area in NIC Control SetRemove VLAN/Change VLAN property Driver setting changed by NIC Control SetGN-FE605M PCI Adapter User’s Guide 8. Limited Warranty 1-Year WarrantyKEEP THIS STUB FOR YOUR PURCHASING RECORD Customer Phone No Address Email Model Serial Date of Purchase Place of Purchase From Whom