English
4.Locate the AGP slot. If necessary, remove the metal cover from this slot; then align your graphics card with the AGP slot, and press it in firmly until the card is fully eated.
Graphics card | AGP slot |
5.Replace the screw to fasten the card in place, and replace the computer cover.
6.Plug the display cable into your card; then turn on the computer and monitor. If your graphics card came with a DVI connector, you can connect a flat panel display to the appropriate connector, as shown below...
To TV or VCR
To VGA Monitor
To Flat Panel Display
(For
You are now ready to proceed with the installation of the graphics card driver. For detailed
instructions, select your operating system from the list below.
- 8 - |