Using The Programmer/Clock
Through your clock you will be able to set the time of day and set the minute minder.
The programmer buttons (push button timer)
There are three buttons on this type of timer. The table below shows you what their symbols look like, depending on the model type, and what they do.
Symbol | Symbol | Down / Minus | What is it? |
| - |
| |
| Used to decrease cook / end time, remove | ||
| minutes from the minute minder and adjust | ||
| the time of day. |
| |
| Also for listening to and setting the alarm | ||
| + | tone. There are 3 tones to choose from. | |
| Up / Plus |
| |
| Used to increase cook / end time, add minutes | ||
| to the minute minder and adjust the time of | ||
|
| day. |
|
|
| Function button |
|
|
| Used to select the functions available on this | |
|
| timer. |
|
|
| Press once for: Minute Minder. | |
|
|
|
|
What your timer symbols
mean.
Automatic | Cook Pot |
symbol |
|
A |
|
Minute Minder symbol
Setting the time of day (push button timer) ● Press the Plus and Minus buttons together for a few
seconds, and release.
● The ‘●’ in between the numbers on the LED Display will begin to flash.
● While the ‘●’ is flashing it is possible to adjust the time using the Plus and Minus buttons.
● Important - Once the time has been set, allow approximately 30 seconds before using any of the other timer functions. This ensures that the time will remain correct.
Wait until the clock has finished flashing before attempt- ing to use other functions of the clock
iThis is a 24 hour clock. Before you do anything with your appliance - you must set the cor- rect time of day.
A |
7
