Technical Data

Installing a hob above the appliance 70cm models

Where the appliance is installed under a worktop, with a hob installed above it, the installation instructions for the hob must be read in conjunction with these instructions.

When the appliance is installed under a gas hob, care must be taken to ensure that the hob inlet pipe is as close to the back wall as possible, so that it does not obstruct the appliance.

If a flexible inlet pipe is used, it must hang vertically and not be trapped between the oven and rear wall.

Important: - ensure that you route all mains and electrical cables and flexible tubing well clear of any adjacent heat source, such as an oven, grill or hob.

Electrical supply

220 - 240V ~ 50Hz

Load (Wattage)

4120 W - 4900 W

Energy Rating

A - B

38

Page 40
Image 40
Glen Dimplex Home Appliances Ltd BI 70 / 90 FP manual Technical Data, Installing a hob above the appliance 70cm models