INTRODUCTION
Thank you for choosing a British built appliance by Belling.
We hope that the following information will help you to familiarise yourself with the features of the appliance, and to use it successfully and safely.
Ourpolicyis one of constantdevelopment
&improvement. Strict accuracy of illustrations and specifications is not guaranteed. Modification to design and materials may be necessary subsequent to publication.
This appliance must be installed in accordance with the regulations in force, and only in a well ventilated space. Read the instructions before installing or using this appliance.
Your new appliance is designed to be installed flush to base units.
Your 1st Year Guarantee
To fulfil the conditions of your guarantee, this applia nce must be correctly installed and operated, in accordance with these instructions, and only be used for normal domestic purposes.
Please note that the guarantee, and Service availability, only apply to the UK and Republic of Ireland.
Before using the appliance for the first time, remove any protective polythene film and wash the oven shelves in hot soapy water, to remove their protective coating of oil. Even so, when you first turn on the oven or grill you may notice a smelland some smoke.
Gas & Electrical connection
Please refer to installation instructions for the Gas & Electrical Safety Regulations and the Ventilation Requirements.
In your own interest, and that of safety, it is the law that all gas appliances be installed by competent persons, who will ensurethat the installation is in accordance with “The Gas Safety (Installation & Use) Regulations 1994”, & the “The Gas Safety (Installation & Use) (Amendment) Regulations 1996”. Failure to comply withthese Regulations is a criminal offence. Corgi registered installers undertake to work to satisfactory standards.
Disconnection of gas and electric appliances should always be carried out by competent persons.
Warning: This appliance must be earthed.
To replace an oven light bulb
Caution: Switch off the electricity supply to the cooker at the socket, to avoid the risk of electric shock.
Wait until the oven is cool, then remove the shelves.
The oven light is at the rear of the oven cavity.
Remove the loose oven back - unscrew the 4 securing screws (one at each cor- ner).
Please note that the oven light bulb is not covered by the guarantee. Replacement bulbs can be ordered from your local supplier, or bought froma hardware store.
2
