Manuals / Global Machinery Company / Power Tools / Power Screwdriver

Global Machinery Company 710W Unpacking, Adjusting the driving depths, Fitting a 1/4 shank bit

Models: 710W

1 12
Download 12 pages 21.53 Kb
Page 8
Image 8

Unpacking

Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

Adjusting the driving depths

The depth to which a screw is driven into the wall or other surface can be accurately set to suit the type of screw and the material being fastened.

The driving depth is adjusted with the depth adjustment collar (2).

1.Pull the depth adjustment collar forward towards the nose piece (1) as far as it will go.

2.To increase the driving depth rotate the depth adjustment collar in a clockwise direction (viewed from the rear).

3.To decrease the driving depth rotate the depth adjustment collar in an anti-clockwise direction (viewed from the rear).

4.When the driving depth has been correctly adjusted pull

the depth adjustment collar backwards the rear of the tool until it touches the large hex nut (4) on the front of the tool housing.

NOTE. It may be necessary to drive a number of screws into a test piece of material to establish the ideal driving depth adjustment.

Fitting a 1/4” shank bit

1/4” Shank bits and bit holder extensions such as the one supplied as an accessory can be fitted into the magnetic hex shank bit holder (3) located inside the nose piece (1). The magnetic hex shank bit holder makes it easier and quicker to fit screw driving bits.

When removing screws and other fasteners, make sure that the depth adjustment collar (2)

is pulled all the way forwards towards the nose piece (1) and that forward/reverse switch (9) is positioned on the left-hand side of the tool (as viewed from the rear).

Switching on and off

1.To switch the tool on, squeeze the variable speed trigger switch

(7).

2.The more pressure exerted on the switch the faster the motor will turn.

3.Releasing the trigger switch stops the motor.

CAUTION. Always maintain tight control of the tool when switching on and off and remember that the motor will continue to turn for a short while after switching off.

8

Page 7 Page 9
Page 8
Image 8
Global Machinery Company 710W Unpacking, Adjusting the driving depths, Fitting a 1/4 shank bit, Switching on and off
Page 7 Page 9

710W specifications

Global Machinery Company has established itself as a leader in the heavy machinery sector, and among its impressive lineup is the 710W model, which showcases the company’s commitment to innovation, reliability, and performance. The 710W is a versatile wheel loader designed to meet the rigorous demands of industrial and construction applications while providing ease of use and exceptional power.

One of the standout features of the 710W is its powerful engine, which delivers robust horsepower and torque. This ensures efficient operation, making it perfect for various tasks such as loading materials, lifting heavy equipment, and even site preparation. The loader is equipped with environmentally friendly technology, adhering to stringent emissions regulations without compromising performance.

Another notable characteristic of the 710W is its advanced hydraulic system. This system enhances lift and tilt capabilities, allowing operators to handle heavy loads with precision and control. With an impressive breakout force, the 710W can perform well in even the toughest conditions, making it a go-to choice for contractors and operators.

The design of the 710W also reflects its user-centric philosophy. The spacious and ergonomic cab is fitted with modern controls and visibility enhancements, ensuring that operators can work comfortably for extended periods. Features like climate control and adjustable seating contribute to improved comfort, reducing fatigue during long work hours.

In terms of technology, the 710W incorporates smart connectivity features, allowing operators to monitor machine performance and diagnostics in real-time. This connectivity not only helps in preventive maintenance but also aids in maximizing operational efficiency.

Durability is a hallmark of the 710W, as it is built with high-strength materials that can withstand harsh environments. The robust frame and reinforced components ensure a long lifespan and reduce the need for frequent repairs.

In conclusion, the Global Machinery Company 710W is a powerful, efficient, and user-friendly wheel loader that excels in a variety of applications. Its blend of advanced features, cutting-edge technology, and rugged durability makes it a valuable asset in the heavy machinery industry, ensuring that operators can tackle projects with confidence and ease. As industries evolve, the 710W stands out as a testament to Global Machinery Company’s dedication to innovation and performance.