Direction of rotation

The direction of motor rotation is controlled by the forward/ reverse switch (9).

1.The bit rotates in a clockwise direction (viewed from the rear) when the forward/reverse switch is set to the right-hand side of the tool. This is the position required for driving screws and other fasteners.

2.The bit rotates in an anti- clockwise direction (viewed from the rear) when the forward/reverse switch is set to the left-hand side of the tool. This is the position required for removing screws and other fasteners.

CAUTION. Never change the direction of motor rotation while the tool is switched on. Always switch off at the power point before operating the forward/reverse switch otherwise you could damage the motor.

Lock-on button

The lock-on button (6) can be used to maintain the operation of the tool without having to constantly press the trigger switch

(7).

1.Squeeze the trigger switch to set the desired speed of the motor.

2.While holding the trigger switch depressed, push in the lock-on button (6). This holds the trigger switch in the on position without the need to constantly hold it.

3.To release the lock-on button, press and release the trigger switch.

Speed selection

The speed at which the motor turns when the trigger switch is fully depressed depends on the setting of the speed control

(8).

It is important to select the correct speed to suit the task. If necessary, trial the tool at different speeds to determine the optimum setting, start the trial at the slowest speed.

1.Rotate the speed control in a clockwise direction (viewed from the rear) to increase the speed.

2.Rotate the speed control in an anti-clockwise direction (viewed from the rear) to decrease the speed.

Operation

When the tool is switched on and the motor is running, the magnetic hex shank bit holder (3) does not rotate. It is only when the bit or screw is pressed against the material being fastened that the screw bit turns.

1.Fit the bit or bit holder extension into the magnetic hex shank bit holder (3) and ensure that the direction of rotation (forward or reverse) is correct.

2.Switch on the tool. Ensure that the tool is held perpendicular to the head of the screw.

3.Set the correct speed.

4.Drive or unscrew the fastener by applying pressure to the screw head.

5.The magnetic hex shank bit holder will stop rotating when the pressure is released.

Belt clip

The belt clip (4) permits the tool to be hung on a belt when not in use thus allowing the operator to use both hands for other tasks.

When the tool is again required, it is conveniently available.

9

Page 8 Page 10
Page 9
Image 9
Global Machinery Company 710W Direction of rotation, Lock-on button, Speed selection, Operation, Belt clip
Page 8 Page 10

710W specifications

Global Machinery Company has established itself as a leader in the heavy machinery sector, and among its impressive lineup is the 710W model, which showcases the company’s commitment to innovation, reliability, and performance. The 710W is a versatile wheel loader designed to meet the rigorous demands of industrial and construction applications while providing ease of use and exceptional power.

One of the standout features of the 710W is its powerful engine, which delivers robust horsepower and torque. This ensures efficient operation, making it perfect for various tasks such as loading materials, lifting heavy equipment, and even site preparation. The loader is equipped with environmentally friendly technology, adhering to stringent emissions regulations without compromising performance.

Another notable characteristic of the 710W is its advanced hydraulic system. This system enhances lift and tilt capabilities, allowing operators to handle heavy loads with precision and control. With an impressive breakout force, the 710W can perform well in even the toughest conditions, making it a go-to choice for contractors and operators.

The design of the 710W also reflects its user-centric philosophy. The spacious and ergonomic cab is fitted with modern controls and visibility enhancements, ensuring that operators can work comfortably for extended periods. Features like climate control and adjustable seating contribute to improved comfort, reducing fatigue during long work hours.

In terms of technology, the 710W incorporates smart connectivity features, allowing operators to monitor machine performance and diagnostics in real-time. This connectivity not only helps in preventive maintenance but also aids in maximizing operational efficiency.

Durability is a hallmark of the 710W, as it is built with high-strength materials that can withstand harsh environments. The robust frame and reinforced components ensure a long lifespan and reduce the need for frequent repairs.

In conclusion, the Global Machinery Company 710W is a powerful, efficient, and user-friendly wheel loader that excels in a variety of applications. Its blend of advanced features, cutting-edge technology, and rugged durability makes it a valuable asset in the heavy machinery industry, ensuring that operators can tackle projects with confidence and ease. As industries evolve, the 710W stands out as a testament to Global Machinery Company’s dedication to innovation and performance.
Top Page Image Contents