Manuals / Global Machinery Company / Power Tools / Power Screwdriver

Global Machinery Company 710W Additional safety rules for screwguns, Power tool use and care

Models: 710W

1 12
Download 12 pages 21.53 Kb
Page 5
Image 5

Power tool use and care

•Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

•Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

•Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

Service

•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional safety rules for screwguns

•Remove the plug from the socket before carrying out any adjustment, servicing or maintenance.

•Fully unwind cable drum extensions to avoid potential overheating.

•When an extension cable is required, you must ensure it has the right ampere rating for your power tool and is in a safe electrical condition.

•Ensure your mains supply voltage is the same as your tool rating plate voltage.

•Your tool is double insulated for additional protection against a possible electrical insulation failure within the tool.

•Always check walls, floors and ceilings to avoid hidden power cables and pipes.

•After long working periods external metal parts and accessories could be hot.

•Do not put pressure on the screwgun, such that it slows the motor down. Allow the screwgun bit to cut without pressure. You will get better results and you will be taking better care of your tool.

•Always switch off before you put the screwgun down.

•Before operating, check that there is sufficient clearance for the screw under the workpiece.

•Only use accessory bits in good condition.

•Rags, cloths, cord, string and the like should never be left around the work area.

•If possible, always use clamps or a vice to hold your work.

•Ensure that the lighting is adequate.

5

Page 4 Page 6
Page 5
Image 5
Global Machinery Company 710W instruction manual Additional safety rules for screwguns, Power tool use and care
Page 4 Page 6

710W specifications

Global Machinery Company has established itself as a leader in the heavy machinery sector, and among its impressive lineup is the 710W model, which showcases the company’s commitment to innovation, reliability, and performance. The 710W is a versatile wheel loader designed to meet the rigorous demands of industrial and construction applications while providing ease of use and exceptional power.

One of the standout features of the 710W is its powerful engine, which delivers robust horsepower and torque. This ensures efficient operation, making it perfect for various tasks such as loading materials, lifting heavy equipment, and even site preparation. The loader is equipped with environmentally friendly technology, adhering to stringent emissions regulations without compromising performance.

Another notable characteristic of the 710W is its advanced hydraulic system. This system enhances lift and tilt capabilities, allowing operators to handle heavy loads with precision and control. With an impressive breakout force, the 710W can perform well in even the toughest conditions, making it a go-to choice for contractors and operators.

The design of the 710W also reflects its user-centric philosophy. The spacious and ergonomic cab is fitted with modern controls and visibility enhancements, ensuring that operators can work comfortably for extended periods. Features like climate control and adjustable seating contribute to improved comfort, reducing fatigue during long work hours.

In terms of technology, the 710W incorporates smart connectivity features, allowing operators to monitor machine performance and diagnostics in real-time. This connectivity not only helps in preventive maintenance but also aids in maximizing operational efficiency.

Durability is a hallmark of the 710W, as it is built with high-strength materials that can withstand harsh environments. The robust frame and reinforced components ensure a long lifespan and reduce the need for frequent repairs.

In conclusion, the Global Machinery Company 710W is a powerful, efficient, and user-friendly wheel loader that excels in a variety of applications. Its blend of advanced features, cutting-edge technology, and rugged durability makes it a valuable asset in the heavy machinery industry, ensuring that operators can tackle projects with confidence and ease. As industries evolve, the 710W stands out as a testament to Global Machinery Company’s dedication to innovation and performance.