WhisperKool 5000TI REMOTE CONTROLLER FUNCTIONS - XW260K, Temperature, Button, Normal Functions

REMOTE CONTROLLER FUNCTIONS - XW260K

If your unit has a remote keypad then you will have the XW260K controller.

High Temp / Pre-Chill

	Low Temp
Display	ON / OFF
Set Point

	TEMPERATURE
Button	Normal Functions
ON/OFF	• The ON/OFF button allows the customer the convenience of turning the refrigera-
	tion system ON or OFF, from the control panel. This feature does not disconnect
	power from the unit. In order for the power to be shut off from the unit, the power
	cord must be unplugged from the wall receptacle.
	• Press the ON/OFF button once for button application.
Up and Down	• Use these buttons to scroll up or down the CPSM (Customer Preference Selection
Arrows	Mode) menu.
	• Displays the Highest and Lowest temperature sensed by the Bottle Probe. This
	feature allows the customer instant access to the recorded data applicable to the
	Bottle Probe Temperatures, it can be easily reset to reflect current temperatures.
	1. Press the “UP” arrow, or the “Down” arrow once, and the Highest or Lowest Tempera-
	ture (Hi/Lo) sensed by the Bottle Probe, will be displayed.
	2. To reset the Hi/Lo, press and hold the “Set” button when the Hi/Lo value is displayed
	on the Digital Display, continue to hold the “Set” button until “rst” appears on the
	digital display and then blinks. This will erase the past recorded “Temperature Data
	History” and start recording, from the current time and temperature, forward. Tem-
	peratures displayed would reflect Bottle Probe Temperatures from that point in time,
	and beyond.
	3. The Hi/Lo feature should be reset at initial “Start-Up” and after the Cellar or Cabinet
	has obtained normal operating temperatures, which is generally 55°F.
Cellar PreChill (CPC)	The CPC Feature is activated by pressing the Up button for 3-5 seconds, and the CPC
	logo will be displayed on the digital display. The CPC feature can be terminated by
	pressing the Up button for 3-5 seconds, or the feature will self terminate after 6 hrs.
	1. The (CPC) Feature may be used to Pre-Chill the Cellar prior to loading it with Warm
	Product. The feature will shift the Set Point down to a lower setting of 52°F, for the
	next 6 hours. After the 6 hour time period, the Set Point will automatically return to
	the original Set Point.
	2. The CPC feature can be conveniently adjusted to the customer’s specific needs, by
	accessing the “Customer Preference Select Mode” (CPSM). See Customer Preference
	Select Mode Instructions.

Page 29