WhisperKool 5000TIR owner manual Installation Options, Exterior Grille Installation

INSTALLATION OPTIONS

Exterior Grille Installation

The exterior grille is required on all installations where the condenser side of the unit is exposed to the outside of the dwelling (i.e. rain and weather).

STEP 1:

Now determine at what depth the unit will be installed:

• For a non-flush installation (i.e. holes location #2 WhisperKOOL retrofit or #1 Middle Wall or #3), place the grille on the condenser end and line up the holes on the grille with the holes on unit location #4. Use the 8 self tapping screws provided to fasten the grille to the unit.

•For a flush installation, place the grille on the condenser side and then place the mounting bracket over the grille sides, “stacking” them. Align the holes and fasten with the 8 self-tapping screws provided.

* It is required to use self tapping screws provided. Do not drill screws into unit.

Non-Flush Installation Flush Installation

Page 19