Changing the blade

CAUTION. Always ensure that the biscuit joiner is switched off and unplugged from the power supply before making any adjustments.

1.Loosen and remove the 4 screws on the base of the biscuit joiner.

2.Remove the base plate to reveal the blade (fig K).

K

 

L

 

 

 

3.Whilst holding the spindle lock button (2) rotate the blade by hand until the blade locks in place (fig L).

4.Whilst depressing the spindle lock button, turn the blade flange anti-clockwise using the pin wrench provided (fig M).

M

 

N

 

 

 

5.Remove the outer blade flange (fig N).

6.Remove the blade from the inner flange.

7.Clean the blade flanges thoroughly before mounting the new blade. Wipe a drop of oil onto the inner and outer flange where they will touch the blade.

8.Mount the new blade onto the spindle and against the inner flange.

9.Replace the outer flange and tighten.

10. Ensure that the spindle lock button is released.

WARNING. The direction in which the blade rotates has to be the same as the direction of the arrow marked on

the housing.

IMPORTANT. After replacing the cutting blade, check that it runs freely by first testing if it spins by hand.

11.Replace the base plate and secure with the 4 screws.

12.Plug the machine into a power socket and run the biscuit joiner under no load to check that it runs smoothly before using it to cut any material.

Turning on and off

1.Connect the plug to the power point.

2.Push the on/off switch (1) forward and up over the latching ramp to lock the switch on (fig O).

O

 

P

 

 

 

3.Once cutting is finished, pull in and release the on/off switch (1) to stop the motor (fig P).

WARNING. The blade continues to turn for a few seconds even though the switch is turned off. Keep your hands well away from the moving blade.

10

Page 9 Page 11
Page 10
Image 10
Global Machinery Company BJ600 instruction manual Changing the blade, Turning on and off
Page 9 Page 11

BJ600 specifications

Global Machinery Company is a leader in the manufacturing and engineering of high-performance machinery, with a commitment to innovation and sustainable practices. One of its standout products is the BJ600, a cutting-edge machine designed for a variety of industrial applications. The BJ600 is characterized by its robust construction, advanced features, and efficiency, making it a preferred choice among professionals in multiple sectors.

One of the main features of the BJ600 is its high-powered engine, which delivers exceptional performance while maintaining energy efficiency. The engine utilizes advanced fuel injection technology, ensuring optimal combustion and reduced emissions, aligning with global sustainability efforts. This not only helps in lowering operational costs but also minimizes the environmental footprint of machinery operations.

The BJ600 is equipped with a state-of-the-art control system that enhances usability and precision. The user-friendly interface allows operators to easily monitor and adjust the machine's performance, facilitating seamless integration into existing workflows. Additionally, the control system offers real-time data analytics, giving users insights into machine performance and maintenance needs, thereby enhancing productivity.

This machine is also built to withstand the rigors of demanding work environments. The BJ600 features a heavy-duty frame and components that are resistant to wear and tear, ensuring longevity and reliability. Its design incorporates advanced materials that are both lightweight and durable, allowing for enhanced maneuverability without compromising strength.

In terms of safety, the BJ600 is outfitted with multiple safety features, including emergency stop controls, protective shielding, and advanced sensor technology. These features not only protect the operator but also ensure that the machine operates within safe parameters, significantly reducing the risk of accidents.

Another notable characteristic of the BJ600 is its versatility. It can be easily customized with various attachments and accessories, making it suitable for a wide range of applications, including construction, agriculture, and manufacturing. This adaptability ensures that the BJ600 can meet the specific needs of different industries, providing value and flexibility to its users.

In conclusion, the Global Machinery Company BJ600 stands out in the world of industrial machinery due to its powerful performance, innovative technologies, user-friendly features, and commitment to safety and efficiency. As industries continue to evolve, the BJ600 remains a reliable and adaptable solution for those seeking high-quality machinery.
Top Page Image Contents