General safety instructions

To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this Manual. All persons who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards. Children and infirm people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.

WARNING. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read and heed the advice given in the additional important safety instructions.

1.Keep the work area clean and tidy. Cluttered work areas and benches invite accidents and injury.

2.Consider the environment in which you are working. Do not use power tools in damp or wet locations. Keep the work area well lit. Do not expose power tools to rain. Do not use power tools in the presence of flammable liquids or gases.

3.Keep visitors away from the work area. All visitors and onlookers, especially children and infirm persons, should be kept well away from where you are working. Do not let others in the vicinity make contact with the tool or extension cord.

4.Store tools safely. When not in use, tools should be locked up out of reach.

5.Do not force the tool. The tool will do the job better and safer working at the rate for which it was designed.

6.Use the correct tool for the job. Do not force small tools or attachments to do the job best handled by a heavier duty tool. Never use a tool for a purpose for which it was not intended.

7.Dress correctly. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber gloves and non-slip footwear are recommended when working outdoors. If you have long hair, wear a protective hair covering.

8.Use safety accessories. Safety glasses and earmuffs should always be worn. A face or dust mask is also required if the sanding operation creates dust.

9.Do not abuse the power cord. Never pull the cord to disconnect the tool from the power point. Keep the cord away from heat, oil and sharp edges.

10.Secure the work piece. Use clamps or a vice to hold the work piece. It is safer than using your hand and frees both hands to operate the tool.

11.Do not overreach. Keep your footing secure and balanced at all times.

12.Look after your tools. Keep tools sharp and clean for better and safer performance. Follow the instructions regarding lubrication and accessory changes. Inspect tool cords periodically and, if damaged, have them repaired by an authorised service facility. Inspect extension cords periodically and replace them if damaged. Keep tool handles dry, clean and free from oil and grease.

13.Disconnect idle tools. Switch off the power and disconnect the plug from the power point before servicing, when changing accessories and when the tool is not in use.

14.Remove adjusting keys and wrenches. Check to see that keys and adjusting wrenches are removed from the tool before switching on.

15.Avoid unintentional starting. Always check that the switch is in the OFF position before plugging in the tool to the power supply. Do not carry a plugged in tool with your finger on the switch.

16.Use outdoor rated extension cords. When a tool

is used outdoors, use only extension cords that are intended for outdoor use and are so marked.

4

Page 3 Page 5
Page 4
Image 4
Global Machinery Company DC750 instruction manual General safety instructions
Page 3 Page 5

DC750 specifications

The Global Machinery Company's DC750 is a state-of-the-art equipment that has rapidly gained recognition among industry professionals for its remarkable capabilities and innovative features. Designed to meet the demanding requirements of industrial applications, the DC750 stands out for its robust construction, impressive performance, and advanced technology.

At the heart of the DC750 is its powerful engine, which delivers exceptional torque and efficiency, enabling the machine to handle a wide array of tasks with ease. The engine is designed to minimize fuel consumption while maximizing output, making it both an environmentally friendly and cost-effective choice for operators. This efficiency is further enhanced by the advanced hydraulic system integrated into the machine, providing smooth and precise control over operations. The DC750 can tackle heavy lifting, digging, and material handling without compromising productivity.

One of the standout features of the DC750 is its user-friendly interface, which employs cutting-edge technology to ensure operators can easily navigate and control the machine. The touchscreen display provides real-time data and analytics, allowing operators to monitor performance metrics and make informed decisions to optimize their work processes. Additionally, the machine is equipped with smart technology that provides diagnostic alerts and maintenance reminders, enhancing longevity and reducing downtime.

Safety is a paramount concern in heavy machinery operation, and the DC750 is built with comprehensive safety measures. It features an advanced monitoring system that includes sensors and alarms to prevent accidents and improve operator awareness. The machine's design incorporates stability features that ensure it remains grounded during operation, further promoting safety at job sites.

Durability is also a key characteristic of the DC750. Constructed with high-quality materials, the machine can withstand harsh conditions and challenging environments, making it ideal for construction, mining, and agriculture. The robust frame and components are engineered to resist wear and tear, prolonging the lifespan of the equipment and providing excellent return on investment.

In conclusion, the Global Machinery Company DC750 is a powerful, efficient, and versatile piece of equipment tailored to meet the needs of various industrial applications. Its advanced technologies, safety features, and durable construction make it a leading choice for professionals seeking reliable and effective heavy machinery solutions. Whether for lifting, digging, or material handling, the DC750 is designed to enhance productivity and operational efficiency while ensuring the highest standards of safety and durability in the field.
Top Page Image Contents