•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of

untrained users.

•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

•Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

•Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.

Service

•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool

is maintained.

Additional safety rules for electric chain saws

Note. For safety reasons the electric chain saw is shipped with the chain brake fully engaged. This brake must be released before the saw becomes operational.

•Never cut into the ground.

•Never cut into wire fences.

•Never cut into samplings.

•Never cut into prepared wood.

•Use the Chainsaw to cut only wood.

•Remove the plug from the mains immediately if the supply cable is damaged or cut.

•Use the bar cover when moving the electric chain saw away from the working site.

•During transport the brake must be applied to avoid accidental start-up.

•Make sure the tool is disconnected when checking, tigthtening, changing or cleaning the chain.

•Always disconnect the electric chain saw when not in use, to avoid damage to third persons.

•Do not expose the electric chain saw to rain or windy conditions or in poor light.

•Find a suitable position before beginning work.

•When working on slopes, the saw operator must stand beside or above the wood to cut, i.e. felled trees.

•Use the electric chain saw holding it firmly with both hands.

•Make a wedge-shaped cut before felling the tree, then the felling cut leaving a hinge for the felling direction.

•Beware of any falling branches after felling operations.

•Beware of wood splinters when cutting chopped wood.

•Ensure your chain saw is suitable for the job.

•Never work above shoulder level or reach out to cut a branch: ensure you have stable footings at all times.

5

Page 4 Page 6
Page 5
Image 5
Global Machinery Company ELC2000 Additional safety rules for electric chain saws, Untrained users, Is maintained
Page 4 Page 6

ELC2000 specifications

Global Machinery Company (GMC) has consistently been at the forefront of innovation in the manufacturing sector, and its latest offering, the ELC2000, is no exception. This advanced piece of equipment is designed to meet the demands of modern industries, providing cutting-edge solutions that enhance productivity and efficiency.

The ELC2000 is equipped with a host of features that set it apart from traditional machinery. One of its main characteristics is its modular design, allowing for easy customization and upgrading. This modularity ensures that businesses can scale their operations without the need for complete machinery replacement, making the ELC2000 a cost-effective investment for companies looking to future-proof their production lines.

In terms of technology, the ELC2000 incorporates smart automation systems that utilize artificial intelligence to optimize performance. This includes real-time monitoring and predictive maintenance capabilities, which significantly reduce downtime and operational costs. The system's AI can analyze data patterns to anticipate potential failures, allowing for timely interventions that keep production flowing smoothly.

Another key feature of the ELC2000 is its advanced energy management system. Designed to operate efficiently, the machinery minimizes energy consumption without compromising performance. This not only reduces operating costs but also aligns with global sustainability goals, making the ELC2000 an environmentally friendly option for manufacturers.

The user interface of the ELC2000 is intuitive, designed for ease of use. Operators can easily navigate through the system, accessing vital information and controls at their fingertips. Enhanced safety features are also integrated into the design, ensuring that operators can work confidently and securely around the machinery.

Furthermore, the ELC2000 supports a variety of materials and applications, making it versatile across different sectors, including automotive, aerospace, and consumer goods. This adaptability allows companies to utilize the same machinery for various projects, thereby maximizing their investment.

In conclusion, Global Machinery Company's ELC2000 stands out due to its innovative features, smart technologies, and versatility. With its modular design, AI-driven capabilities, and commitment to energy efficiency, the ELC2000 is poised to revolutionize how industries operate, making it a critical asset for companies aiming to enhance productivity while being mindful of sustainability.
Top Page Image Contents