Global Machinery Company HG2000K Additional safety rules for Heat guns, Wear a breathing mask

Models: HG2000K

1 9
Download 9 pages 57.46 Kb
Page 5
Image 5

17.Stay alert. Watch what you are doing. Use common sense. Do not operate a power tool when you are tired.

18.Check for damaged parts. Before using a tool, check that there are no damaged parts. If a part is slightly damaged, carefully determine if it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, proper mounting and any other conditions that may affect the operation of the tool. A part that is damaged should be properly repaired or replaced by an authorised service facility, unless otherwise indicated in this Instruction Manual. Defective switches must be replaced by an authorised service facility. Do not use a tool if the switch does not turn the tool on and off correctly.

19.Guard against electric shock. Prevent body contact with grounded objects such as water pipes, radiators, cookers and refrigerator enclosures.

20.Use only approved parts. When servicing, use only identical replacement parts. Use an authorised service facility to fit replacement parts.

WARNING. The use of an accessory or attachment, other than those recommended in this Instruction Manual, may present a risk of personal injury.

Additional safety rules for Heat guns

A fire may arise if the appliance is not use with care.

Be careful when using the appliance in places where there are combustible materials, such as inflammable liquids, rags, wood shavings and the like.

Do not apply the heat to the same place for a long time.

Do not use in the presence of an explosive atmosphere.

Heat may be conducted to combustible materials which are out of sight

Place the appliance on its stand whenever you place it down and after use and allow to cool before storage;

Never leave the appliance unattended when in use.

Rags, cloths, cord, string, wood shavings and the like should never be left around the work area.

Support the work properly.

If you are interrupted when operating the appliance, complete the process and switch off before looking up.

When using the appliance, use safety equipment including safety goggles or shield, breathing mask and protective clothing including safety gloves.

Wear goggles Wear earmuffs

Wear a breathing mask

Never attempt to use the appliance to dry animals, clothing or hair.

Never use this appliance as a hair dryer.

Always use in ventilated areas.

Do not leave the appliance unattended when in use.

This product is designed for light domestic use only, it is not designed for industrial purposes and whilst every care has been taken to make hot air gun safe, accidents can happen. By following the simple safety guide you can avoid accidents.

WARNING: During application the heat nozzle must be kept at least 16mm away from the work piece. This is to allow air flow.

5

Page 5
Image 5
Global Machinery Company HG2000K instruction manual Additional safety rules for Heat guns, Wear a breathing mask