Dear Customer
If you require any help with your product, whether it is a Warranty claim, spare part or user information, please phone our Help Line for an immediate response. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand.
Introduction
Your new GMC power tool will more than satisfy your expectations. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria.
You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service.
Caution. Carefully read through this entire Instruction Manual before using your new GMC Power Tool. Take special care to heed the Cautions and Warnings.
Your GMC power tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.
Environmental protection
Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
Description of symbols
The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Conforms to relevant standards for electromagnetic compatibility.
Specifications
Nominal voltage: | |
Input power: | 250W |
No load speed: | 1400 RPM |
Table size: | 300mm x 300mm |
Throat length: | 200mm |
Bevel angle: | 0° to 45° |
Cutting capacity: | 80mm |
Saw blade length: | 1400mm |
Saw blade width*: | |
Teeth per inch: | 6 TPI |
* Supplied with a 1400 x 0.35 x 6.35mm general purpose blade
Safety rules for laser lights
The laser light/laser radiation used in the GMC REDEYE® system is Class 1 with maximum 0.39mW and 650nm wavelengths. These lasers do not normally present an optical hazard, although staring at the beam may cause flash blindness.
Warning. Do not stare directly at the laser beam. A hazard may exist if you deliberately stare into the beam, please observe all safety rules as follows;
•The laser shall be used and maintained in accordance with the manufacturer’s instructions.
3
