Global Machinery Company MAG2050R instruction manual Additional safety rules for electric routers

• Do not use the power tool if the switch does not turn it		• Ensure your mains supply voltage is the same as your tool
on and off. Any power tool that cannot be controlled with the		rating plate voltage.
switch is dangerous and must be repaired.		• Your tool is double insulated for additional protection against a
• Disconnect the plug from the power source before		possible electrical insulation failure within the tool.
making any adjustments, changing accessories, or		• Always check walls, floors and ceilings to avoid hidden power
storing power tools. Such preventive safety measures		cables and pipes.
reduce the risk of starting the power tool accidentally.		• After long working periods external metal parts and
• Store idle power tools out of the reach of children and
		accessories could be hot.
do not allow persons unfamiliar with the power tool or		• Always wear eye and ear protection and use a dust mask.
these instructions to operate the power tool. Power tools
		• Handle router bits with care, they can be extremely sharp.
are dangerous in the hands of untrained users.
		• Check the bit carefully for signs of damage or cracks before
• Maintain power tools. Check for misalignment or binding of
		use. Replace cracked or damaged bits immediately.
moving parts, breakage of parts and any other condition that
		• Remove all nails, screws and other objects from the
may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused		workpiece. You can damage the bit and the tool by cutting
by poorly maintained power tools.		into a nail or other metal. It can also present a safety hazard.
• Keep cutting tools sharp and clean. Properly maintained		• Always use both handles and make sure that you have a
cutting tools with sharp cutting edges are less likely to bind		good grip on the router before proceeding with any work.
and are easier to control.		• Keep your hands away from the rotating bit.
• Use the power tool, accessories and tool bits etc.,		• Make sure that the bit is not in contact with the workpiece
in accordance with these instructions and in the manner		when you switch the machine on.
intended for the particular type of power tool, taking		• Before using the tool to make a cut, switch on and let it run
into account the working conditions and the work to be
		for a while. Watch for vibration or wobbling that could indicate
performed. Use of the power tool for operations different
		an improperly installed bit.
from intended could result in a hazardous situation.
		• Take notice of the direction of rotation of the bit and the
Service
		direction of feed.
• Have your power tool serviced by a qualified repair
		• Do not leave the machine running unattended. Operate the
personnel using only identical replacement parts.
		tool only when controlled by both hands.
This will ensure that the safety of the power tool is
		• Always switch off and wait until the bit has come to a
maintained.
		complete standstill before removing the machine from the
Additional safety rules for electric routers
		workpiece.
• Remove the plug from the socket before carrying out any		• Do not touch the bit immediately after operation. It may be
adjustment, servicing or maintenance.		extremely hot and could burn your skin.
• Fully unwind cable drum extensions to avoid potential		• Rags, cloths, cord, string and the like should never be left
overheating.		around the work area.
• When an extension cable is required, you must ensure it has		• Use safety equipment including safety goggles or shield, ear
the right ampere rating for your power tool and is in a safe		protection, dust mask and protective clothing including safety
electrical condition.	5	gloves.