Troubleshooting continued
Problem | Possible cause | Suggested remedy |
|
|
|
Insufficient pressure or decreased | The tool requires air supply outside the | 1) Select another air tool that that will |
outlet capacity continued | range of the compressors capabilities. | allow you to achieve the same end |
|
| result which will operate within the |
|
| compressors capabilities. |
|
| 2) Select another tool to achieve the |
|
| same result (could be a power tool |
|
| or hand tool) to perform the task. |
|
| 3) Purchase a suitable air |
|
| compressor from the GMC range |
|
| that will run the required tool. |
|
|
|
| Drain cock may not be fully closed. | Check the drain cock to ensure it has |
|
| been fully closed. If not tighten. |
|
|
|
| Safety valve fully leaking. | Check out the condition of the |
|
| safety valve. If the valve is leaking |
|
| immediately shut off the compressor |
|
| and cease using. Have the unit |
|
| serviced/checked by an authorised |
|
| service centre and repaired. Don’t |
|
| continue to use the unit with a leaking |
|
| safety valve. |
|
|
|
| Air line hose leaking | Examine the air hose for any holes |
|
| and tears. If you find any holes or tears |
|
| replace the air hose. |
|
|
|
15
