Global Machinery Company PB26D Safety rules for petrol blowers, Substitute faulty silencers

Models: PB26D

1 12
Download 12 pages 29.03 Kb
Page 4
Image 4

Safety rules for petrol blowers

Training

Read the instructions carefully. Get familiar with the controls and proper use of the equipment.

Only use the blower for the purpose for which it was designed, i.e. blowing garden debris. Any other use can be hazardous, causing damage to the machine.

Never allow children or people unfamiliar with these instructions to use the blower. Local regulations may restrict the age of the operator.

Never use the blower:

When people, especially children, or pets are nearby.

If the operator has taken medicine or substances that can affect his ability to react and concentrate.

Remember that the operator or user is responsible for accidents or hazards occurring to other people or their property.

Preparation

While blowing, always wear sturdy footwear and long trousers. Do not operate the equipment with bare feet or open sandals.

WARNING: DANGER! Engine fuel is highly flammable:

Store fuel in containers specifically designed for this purpose.

Refuel using a funnel and outdoors only. Do not smoke while re-fuelling or whenever handling the fuel.

Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel while the engine is running or when the engine is hot.

If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until the fuel has evaporated and the vapour dispersed.

Replace all fuel tanks and containers caps securely.

Substitute faulty silencers.

Before use, always inspect the machine and check that the screws are not worn or damaged.

It is advisable to wear suitable eye protection when operating the blower.

Maintenance and storage

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition. Regular maintenance is essential for safety and performance.

Never store the equipment with fuel in the tank inside a building where vapour may reach a flame or a spark or a source of extreme heat.

Allow the engine to cool before storing in an enclosed space.

To reduce the fire hazard, keep the engine, exhaust silencer, battery compartment (if applicable) and fuel storage area free of grass, leaves, or excessive grease.

If the fuel tank has to be drained, this should be done outdoors and when the engine is cool.

For reasons of safety, do not use the equipment with worn or damaged parts. Parts are to be replaced and not repaired. Parts that are not of the same quality can damage the equipment and be dangerous for your safety.

Fuel goes off fairly quickly. If you find your blower does not start, 1st change the fuel in the tank with newly purchased fuel.

Service

Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Operation safety instructions

WARNING. Stop the engine and unplug the spark plug before any repairs or maintenance operations.

Check that all nuts, bolts and screws are well tightened before every use.

Do not run the engine in an enclosed and/or poorly ventilated area. The gas of the engine contains carbon monoxide, which is dangerous to your health.

Work only when there is sufficient light.

Do not use the blower when it is raining or when the grass is wet.

4

Page 4
Image 4
Global Machinery Company PB26D instruction manual Safety rules for petrol blowers, Substitute faulty silencers