•Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
•Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
•Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
•Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
•Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
•Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation.
Service
•Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool
is maintained.
Additional safety rules for electric routers
•Remove the plug from the socket before carrying out any adjustment, servicing or maintenance.
•Fully unwind cable drum extensions to avoid potential overheating.
•When an extension cable is required, you must ensure it has the right ampere rating for your power tool and is in a safe electrical condition.
•Ensure your mains supply voltage is the same as your tool rating plate voltage.
•Your tool is double insulated for additional protection against a possible electrical insulation failure within the tool.
•Always check walls, floors and ceilings to avoid hidden power cables and pipes.
•After long working periods external metal parts and accessories could be hot.
•Always wear eye and ear protection and use a dust mask.
•Handle router bits with care, they can be extremely sharp.
•Check the bit carefully for signs of damage or cracks before use. Replace cracked or damaged bits immediately.
•Remove all nails, screws and other objects from the workpiece. You can damage the bit and the tool by cutting into a nail or other metal. It can also present a safety hazard.
•Always use both handles and make sure that you have a good grip on the router before proceeding with any work.
•Keep your hands away from the rotating bit.
•Make sure that the bit is not in contact with the workpiece when you switch the machine on.
•Before using the tool to make a cut, switch on and let it run for a while. Watch for vibration or wobbling that could indicate an improperly installed bit.
•Take notice of the direction of rotation of the bit and the direction of feed.
5
