General safety instructions

To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this Manual. All persons who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards. Children and infirm people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.

WARNING. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read and heed the advice given in the additional important safety instructions.

1.Keep the work area clean and tidy. Cluttered work areas and benches invite accidents and injury.

2.Consider the environment in which you are working. Do not use power tools in damp or wet locations. Keep the work area well lit. Do not expose power tools to rain. Do not use power tools in the presence of flammable liquids or gases.

3.Keep visitors away from the work area. All visitors and onlookers, especially children and infirm persons, should be kept well away from where you are working. Do not let others in the vicinity make contact with the tool or extension cord.

4.Store tools safely. When not in use, tools should be locked up out of reach.

5.Do not force the tool. The tool will do the job better and safer working at the rate for which it was designed.

6.Use the correct tool for the job. Do not force small tools or attachments to do the job best handled by a heavier duty tool. Never use a tool for a purpose for which it was not intended.

7.Dress correctly. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber gloves and non-slip footwear are recommended when working outdoors. If you have long hair, wear a protective hair covering.

8.Use safety accessories. Safety glasses and earmuffs should always be worn. A face or dust mask is also required if the drilling operation creates dust.

9.Connect dust extraction equipment. If devices are provided for the connection of dust extraction and collection facilities, ensure that these are connected and properly used.

10.Do not abuse the power cord. Never pull the cord to disconnect the tool from the power point. Keep the cord away from heat, oil and sharp edges.

11.Secure the workpiece. Use clamps or a vice to hold the workpiece. It is safer than using your hand and frees both hands to operate the tool.

12.Do not overreach. Keep your footing secure and balanced at all times.

13.Look after your tools. Keep tools sharp and clean for better and safer performance. Follow the instructions regarding lubrication and accessory changes. Inspect tool cords periodically and, if damaged, have them repaired by an authorised service facility. Inspect extension cords periodically and replace them if damaged. Keep tool handles dry, clean and free from oil and grease.

14.Disconnect idle tools. Switch off the power and disconnect the plug from the power point before servicing, when changing accessories and when the tool is not in use.

15.Remove adjusting keys and wrenches. Check to see that keys and adjusting wrenches are removed from the tool before switching on.

16.Avoid unintentional starting. Always check that the switch is in the OFF position before plugging in the tool to the power supply. Do not carry a plugged in tool with your finger on the switch.

4

Page 3 Page 5
Page 4
Image 4
Global Machinery Company RT300 instruction manual General safety instructions
Page 3 Page 5

RT300 specifications

The Global Machinery Company RT300 is a notable addition to the realm of advanced machinery, specifically designed for diverse industrial applications. Built to meet the rigorous demands of today's manufacturing and construction sectors, the RT300 stands out due to its innovative features, robust technologies, and excellent performance characteristics.

One of the foremost features of the RT300 is its powerful engine configuration. Equipped with a high-efficiency diesel engine, it provides substantial horsepower while maintaining low emissions, adhering to environmental regulations without compromising on performance. This ensures that the RT300 can handle heavy workloads, making it an ideal choice for construction sites, manufacturing plants, and other heavy-duty operations.

The RT300 prides itself on its versatility. Designed with modular attachments, it can be swiftly adapted for various applications - from lifting heavy materials to performing intricate excavation tasks. This adaptability not only streamlines operations but also enhances productivity, allowing companies to maximize their investment in machinery.

Incorporating state-of-the-art technologies, the RT300 features an advanced control system that ensures precision in operation. The user-friendly interface allows operators to manage and monitor the machine with ease, enhancing overall efficiency. Furthermore, real-time diagnostics enable proactive maintenance, reducing downtime and increasing reliability.

Durability is another hallmark of the RT300. Constructed with high-grade materials, it is designed to withstand the rigors of harsh working environments. The robust chassis and reinforced components ensure longevity, which translates into lower operational costs for businesses over time.

Safety is a crucial concern in industrial operations, and the RT300 addresses this with comprehensive safety features. Equipped with an advanced stability control system and multiple sensors, it minimizes risks of accidents while operating on uneven terrain. The ergonomic design of the operator’s cabin also provides improved visibility and comfort, thus enhancing safety while reducing operator fatigue during extended use.

In summary, the Global Machinery Company RT300 represents a significant advancement in industrial machinery. Its powerful engine, versatile attachments, advanced control mechanisms, robust construction, and comprehensive safety features combine to create a reliable and efficient machine. These characteristics make the RT300 a valuable asset for any company looking to enhance its operational capabilities in a competitive landscape.
Top Page Image Contents