Unpacking
Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
Carefully remove all parts from the carton and check the contents against the following list:
1.Table top
2.Router plate
3.Left table leg
4.Right table leg
5.Rear fence
6.Adjustable fence bracket
7.Infeed/outfeed fence panels (2)
8.On/off switch box
9.Guard
10.Mitre gauge
11.Mitre gauge lock knob
12.Mitre gauge bar
13.32mm table insert
14.47mm table insert
15.55mm table insert
16.Guard pin
17.Starting pin
18.Carriage bolts
(1 large, 1 medium, 5 small) (1 small carriage bolt already fitted to adjustable fence bracket)
19.Flat washers for carriage bolts (7) (1 flat washer already fitted to adjustable fence bracket)
20.Lock knobs (3 large, 4 small)
(1 large knob already fitted to adjustable fence bracket)
21.Philips head screws (8)
22.Spring washers (8)
23.Flat washers (8)
24.Nuts (8)
25.Philips head screws for attaching switch box (2)
26.Router plate screws (4)
| 6 | 5 |
|
|
|
| 1 |
|
| 16 | |
|
|
|
| ||
|
|
|
|
| |
| 7 |
|
| 8 |
|
|
|
|
| 9 | |
|
|
|
|
| |
| 7 | 12 | 11 | 10 | 13 |
3 |
|
|
|
| |
|
|
|
|
| |
| 2 |
|
|
| 14 |
|
|
|
|
| |
| 25 | 17 |
|
| 15 |
|
|
|
|
| |
4 | 18 |
| 21 |
|
|
19 |
| 22 |
|
| |
|
|
|
| ||
|
| 23 |
|
| |
|
|
|
|
| |
26 | 20 |
| 24 |
|
|
7
