TacT Audio RCS 2.0S High, 100Hz, 0.40, Front Panel Display, TONE menu, Tone controls are disabled

Front Panel Display
	TONE menu	The Tone menu is designed to allow for easy and very detailed system tonal
		control.
		Note: An EQ preset from the main screen must be selected to enable the
		PAREQ or the Tone controls. If the EQ preset is set to “BP” the PAREQ and
		Tone controls are disabled.
		Tone Menu :
				LOW			MID		HIGH
											dB
				0.0			0.0			0.0
		1				2		3
					1 - LOW filter attenuation.
					2 - MID filter attenuation.
					3 - HIGH filter attenuation.
		Use the “LEFT” and “RIGHT” navigational buttons to highlight an option. To modify
		the selected value use the “UP” and “DOWN” navigational buttons. Level control is
		used to set the low, mid and high frequency filter attenuation. Filter level is given in
		dB and can be changed in increments of 0.1 dB. Maximum filter level is 12 dB and
		the minimum filter level is -12.0 dB. To set a frequency for the LOW, MID, or HIGH
		highlight its level setting and press the “ENTER” button.
	TONE menu	The Frequency and Octave menu is designed to allow you to set the Frequency for
Frequency and Octave		the low, mid and high filters and the Octave for the MID filter. The menu is ac-
		cessed from the level Tone menu shown above. To set a frequency for the LOW,
		MID, or HIGH highlight its level setting and press the “ENTER” button.
		Tone Menu :
			Fr					OCT
			100_Hz						0.40
		1						2
		1				- Frequency setting.
					2 - Octave setting.
		Use the “LEFT” and “RIGHT” navigational buttons to highlight an option. To modify
		the Frequency(Fr) or Octave(OCT) use the “UP” and “DOWN” buttons. Press the
		“MENU” button to return to the filter attenuation menu.
		NOTE: Frequency Control is used to set the cutoff frequency for the low and
		high frequency filters and to set the center frequency for mid (bandpass) fil-
		ter.
24 Tact Audio