Update the RCS 2.0S Firmware
Step V: | This step is optional and is only required if you would like to reset all |
Restoring the Default | internal settings in the unit to their factory defaults. If you proceed |
RCS 2.0S Settings | you will erase your custom user settings. |
| Restore the default settings for the new firmware installed on the RCS 2.0S. |
| 1- From the RCS 2.0S correction software main screen, click on the “Options” |
| menu selection and select the “Default Settings” option. You should now see the |
| Default Settings window. |
RCS 2.0S update complete
2- Select the “Default” button and the default parameters for the RCS 2.0S will be loaded into the RCS 2.0S. The RCS 2.0S will turn OFF and the ON and return to normal operation.
NOTE: If you have TacT digital amplifiers attached to the RCS 2.0S you must set the “AMP” settings to “DISABLED”. The default settings will not be programed if these parameters are set to “ENABLED”.
You have now completed updating your RCS 2.0S and it is ready for normal operation.
