Quick Setup
STEP III | Verify that the selections you made are correct and start the Quick Setup |
| automation. |
32 Tact Audio
-If the settings listed are not correct select the “Back” button to go back and make the appropriate changes and return to the finish screen when you are ready to start the Quick Setup.
-If the settings listed are correct select the “Finish” button. This will start the Quick Setup measurement and programing automation. When the automated process is completed the “Quick Setup Completed” message will be displayed. You can now close the RCS 2.0S software and audition your nine correction presets.
NOTE: The Quick Setup will give you a 15 second delay before the Quick Setup automation starts. This gives you time to leave the listening area before the measurement process begins.
