TacT Audio, Inc | TacT Audio RCS 2.0S specs

TacT Audio, Inc.

201 Gates Road Unit G, Little Ferry – New Jersey 07643, USA

Phone: +1 201 440 9300 – Fax: +1 201 440 5580 – Email: info@tactaudio.com

www.tactaudio.com

Image 38

TacT Audio RCS 2.0S owner manual TacT Audio, Inc

Contents

RCS 2.0S Blank Tact Audio Page Acknowledgments Registration Table of contents Accessories Operating voltage Unpacking the RCS 2.0S Introduction Digital Input Section RCS 2.0S ConnectionsDigital input Digital Output Digital Output Section Tact Audio RCS 2.0S Connections Optional Modules Analog Input Analog Output Section Microphone input Analog OutputOptional DAC module Microphone Input Tact Audio Ports Tact Audio AC mains input & mains switchRCS 2.0S Connections RS-232 interface RS-232 Interface Ports AC mains input Menu Front Panel ControlsStandby Input selector Remote Control Volume Block Correction block Input sampling frequency indicator Correction preset selectionEQ preset selection Front Panel Display Saving Menu SettingsDelay menu Assigned to each input independently Right for each room correction preset including bypassUP and Down buttons to change its value Displ menu Test menu Selection before the AMP setting will be enabled And/or daisy chain RS232 ports to link multiple components REM menu Addr menu Preset Link N Link Y EQ L LEV OCT Parametric EQ Ter Tact Audio Front Panel Display Tone menuFrequency and Octave OFS menu Info menu TacT 2.0S Room Correction Software Your computer system must meet the following requirements Computer Connect yourRCS-2.0 S to your Connection at this time Tact Audio Blank Quick Setup Before You Begin Quick Setup Getting Started Step Quick Setup Automation Update the RCS 2.0S Firmware Tact-2.0 S Programing Mode Update the RCS 2.0S Firmware RCS 2.0S Settings Update the RCS 2.0S Firmware StepRestoring the Default Default Settings window Blank Tact Audio TacT Audio, Inc