| RCS 2.0S Connections |
Analog Output | The RCS 2.0S has 2 stereo analog outputs when the optional DAC module is |
(optional DAC module) | installed: |
| - one analog stereo single ended (RCA) |
| - one analog stereo balanced (XLR) |
Analog Output Section
Microphone input
Connect the supplied measurement microphone to the “Mic Input” connector when taking a room measurement for room correction.
CAUTION: To avoid damage through static discharge, we strongly recommend to turn off the RCS 2.0S at the rear panel mains switch before connecting the microphone.
Microphone Input
Tact Audio 11
